Firmware Upgrade - Beward N13201 Operation User's Manual

Default: reset the camera to the default settings by pressing this button. After that the camera
will reboot automatically. Click this button to reset the camera to factory defaults. After that, the camera
will restart. All settings including IP address, username and password will be reset to their defaults.
IMPORTANT:
Do not turn off power to the camera until the reboot is completed.
If you click the [Default] button, the confirmation dialog box will appear. You will be
prompted to continue or cancel the reset to factory defaults. Click [OK] to continue or click
[Cancel] to cancel.
NOTE:
Also, the camera could be reloaded by pushing the [Reset] button located on the rear side of the housing.
For details, please, see Installation User Manual.
Backup: you can save the camera settings to a file. Click [Save] and specify the path
where you want to save the settings and enter the file name.
NOTE:
When specifying the path, check the permissions on a folder where you want to save a snapshot. If you do
not have the permissions, you cannot save snapshots there.
In Windows 7, you need to start Internet Explorer as an administrator to save records on your local HDD.
Restore: allows you to restore previously saved settings. Click [Browse] or specify the
path of the saved file manually. In the appeared window select the required file by clicking your left
mouse button on the name of the file and click [Open]. Click [OK] to start restoring the settings.
When the restoration is completed, the camera automatically restarts to apply the settings.

7.1.3. Firmware Upgrade

This item allows you to upgrade the camera firmware. Click [Browse] or specify the path of
the firmware manually. In the appeared window select the required file by clicking your left mouse
button on the name of the file and click [Open]. Click [OK] to start updating the firmware.
N13201 Operations User Manual
Chapter 7. The [SETTING] Menu: System
Pic. 7.3
22