Beward N13201 Operation User's Manual page 45

To activate the option switch it to [On].
Turn On UPnP port forwarding: select this item with a check mark to change port
numbers within the range from 1124 to 65534.
NOTE:
To use UPnP, your network router must support it
HTTP Port: type your camera HTTP port to access it over the Internet. For example, the
value of the port you assigned is 10000. In this case, port 80 is used to access the camera over a
local network and port 10000 is used to access the camera over the Internet. The default value is
80.
SSL Port: type the SSL port number to access the camera through a secure connection
HTTPS over the Internet. The default value is 443.
RTSP Port: type the RTSP port number to access the camera over the Internet. The default
value is 554.
NOTE:
To enable and configure the UPnP option on your router, please, refer to its user manual.
N13201 Operations User Manual
Chapter 8. The [SETTING] Menu: Network
Pic. 8.12
.
44