Beward N13201 Operation User's Manual page 40

Encryption: setting a data encryption mode. It is determined automatically but could be
changed also by a user.
Key Length: choose the required length of an active transmit key.
Active Transmit Key: type a password.
Re-type: re-type the password to avoid occasional mistakes.
In case of the WPA-PSK/WPA2-PSK method has been chosen the following items are
available (Pic. 8.5):
Encryption: setting a data encryption mode. It is determined automatically but could be
changed also by a user.
Passphrase: the network can be password-protected, therefore you may need to enter a
password to connect to.
Re-type: re-type the password to exclude any mistakes.
The IP address settings do not depend on the methods of authentication.
Obtain an IP address automatically (DHCP): select this option to obtain an IP address
automatically from a DHCP server on your network. When this option is selected, the [Obtain DNS
server address automatically] option is available, which allows a DNS address to be
automatically obtained.
N13201 Operations User Manual
Chapter 8. The [SETTING] Menu: Network
Pic. 8.6
39