Advanced - Beward N13201 Operation User's Manual

WPS: select [Enabled] to activate this function or [Disabled] to deactivate it.
MAC Address: displays current MAC address of the camera for wireless connection.
IP Address: displays current IP address of the camera for wireless connection.
Configure via: allows you to select a method of setting wireless connection with WPS:

PBC: the connection is established with the help of WPS button. Select the [PBC]
option and press [Connect] button. Then press [WPS] button for 2 minutes on the
other Wi-Fi device.
NOTE:
After pressing a button, the right indicator on the front camera panel will blink with red light showing that the
camera is ready for Wi-Fi connection.

PIN: enter a verification code which is generated by pressing [New PIN code]
button and displayed in a blank near the main position.
For connection to the network via WPS protocol, press [Connect] button, or press
[Disconnect] to break the connection.

8.2. Advanced

The [Advanced] menu includes four tabs: [RTSP], [UPnP], [Bonjour], [DDNS].
N13201 Operations User Manual
Chapter 8. The [SETTING] Menu: Network
Pic. 8.7
41