Beward N13201 Operation User's Manual page 83

After installing a memory card you should format it. To do so you need at first to turn it off
(Pic. 11.18).
NOTE:
There could be such situations when the [SD Card] section is not available. It means that the memory card
is initialized wrong. It may be caused by some difficulties with a card file system or by its defects. To find the
reason check the card on the PC (using a card reader). If the card is operable format it with FAT32. After
that it will be accessible in the present menu.
To format a memory card press the [Execute] button to call a dialog box for format
confirmation. Press the [OK] button to confirm a memory card formatting or the [Cancel] button to
cancel it.
IMPORTANT:
Before formatting, be sure that a memory card does not contain any important information because
formatting leads to loss of all data!
NOTE:
Memory card formatting can take a few minutes and needs camera rebooting.
N13201 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.18
82