Figure 2-1 Main Menu Screen; Figure 2-2 Administration Screen - Comtech EF Data Vipersat CDD-562L User Manual

I n i t i a l C o n f i gu r a t i o n
2.
3.
2-4
From the Administration screen shown in figure 2-2, select the Features
Configuration command by entering F at the command prompt.
Figure 2-2
From the Feature Configuration menu shown in figure 2-3, verify
whether or not the Vipersat Feature Codes appear as shown in the figure.
These codes are entered prior to shipment from the factory; however, if the
unit has been reset with the Restore Factory Defaults command, the
codes will have to be re-entered. If the Feature Codes are not displayed in
Figure 2-1
Main Menu screen
Administration screen
V i p e r s a t C D D - 5 6 X S e r i e s U s e r G u i d e