Download Router V1.5.3 To Image 2; Figure D-19 Unit Information Screen; Figure D-20 Unit Information Screen (Final Status) - Comtech EF Data Vipersat CDD-562L User Manual

2. Repeat the Download procedure for the Base Modem v1.5.1 firmware file,
but do not perform a Hard Reset; it is not necessary to reboot the modem
again. This will insure that the v1.5.1 firmware is in both images in the Base
Modem, as shown in figure D-19.

Download Router v1.5.3 to Image 2

Download the v1.5.3 firmware file to the Router Image 2. This insures that
1.
the latest firmware code is loaded in all images.
2. Get Unit Information one last time and Save the file when prompted. This
file can be used to maintain a record of unlock codes and sent to Comtech
Vipersat if additional features are required. The final "get Information"
should look like the one displayed below.
A p p e n d i x N e t w o r k M i g r a t i o n
D -
Figure D-19 Unit Information screen (Base Modem v1.5.1)
Figure D-20
Unit Information screen (final status)
F i r m w a r e U p g r a d e
D-15