Showlogs - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showlogs - display the specified log
SYNOPSIS showlogs [-t time [-T time] | -p timestamp] [-v | -V | -S] [-r] [-M] error
showlogs [-t time [-T time] | -p timestamp] [-v] [-r] [-M] event
showlogs [-t time [-T time]] [-r] [-M] {power | env}
showlogs [-r] [-M] monitor
showlogs -d domain_id [-t time [-T time]] [-r] [-M] {console | ipl | panic}
showlogs -h
DESCRIPTION The showlogs(8) command displays the specified log.
Log data is displayed in the order of timestamps, starting from the oldest data by
default. Depending on the target for the log collection, the following logs can be
specified:
For Field Replaceable Unit (FRU)
For domain
You must have one of the following privileges to run this command:
Privileges
■
■
■
■
Refer to setprivileges(8) for more information.
Error log, Event log, Temperature and humidity record, and Monitor message
log:
platadm, platop, fieldeng
Power log:
platadm, platop, domainadm, domainmgr, fieldeng
Scan log:
fieldeng
Console message log, Panic message log, and IPL message log:
platadm, platop, domainadm, domainmgr, domainop, fieldeng
• Error log (sometimes includes scan log)
• Power log
• Event log
• Temperature and humidity record
• Monitoring message log
• Console message log
• Panic message log
• IPL message log
System Administration

showlogs(8)

425