Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 115

For xcp version 1110
Hide thumbs Also See for SPARC Enterprise M3000:
Table of Contents

Advertisement

led_type
Used with the setled operand, specifies a software-controlled FRU LED.
The following table indicates which LED states can be controlled using the
setled operand with the off, on, fast, and slow LED state settings. Y
(yes) indicates that the LED can be controlled, N (no) indicates that it
cannot be controlled.
LED
Name
ACTIVE
Power/OK
LOCATE
Locate
SERVICE
Fault/Locate
RDY2RM
Ready to remove
OVERTEMP
Overtemp
DCOK
DC Power
POWER
AC Power
DATA
Data
MGMT
Management
* The OVERTEMP LED and chassis ACTIVE LED may be set to each state.
However, the hardware frequently updates the LED state so changes to the
LED state may not be visible.
Note - Other LEDs are not under software control. A list of LEDs present in the
system can be displayed by using the "env -l" operand.
lifetime [target | -z target]
Clears or queries the runtime of cards that contain an energy storage module
(ESM). Used without options, lifetime displays a list of cards with an
ESM, one card per line, and shows, in minutes, each card's runtime and
remaining lifespan. Runtime is updated at four-hour intervals.
If target is specified, the command lists only the specified ESM card.
If -z is specified, the command zeroes the runtime for the specified target
and clears fault status for the the card. You must specify target with the -z
option. See EXAMPLEs 6, 7, 8, and 9.
list [target]
Lists the External I/O Expansion Units under system management.
If no target is specified, list displays a list of External I/O Expansion Units,
one per line. Each line contains the unique identifier for that box and the
host-specific name(s) for its downlink card(s). See EXAMPLE 3.
If an External I/O Expansion Unit argument or downlink card path is
specified, the command displays a single line with the indicated FRU. If a
host path is specified, only the downlink card information is displayed. If the
verbose option [-v] is set, the output includes detailed FRU information. See
EXAMPLEs 4 and 5.
off
on
fast
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
*
*
*
N
N
N
N
N
N
N
N
N
N
N
N
System Administration
ioxadm(8)
slow
Y
N
Y
Y
*
N
N
N
N
101

Advertisement

Table of Contents
loading

Table of Contents