setnetwork(8)
EXIT STATUS
SEE ALSO
248
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010
Continue? [y|n] :y
If you choose 'y'es, you must execute 'applynetwork' command for
application.
Or you choose 'y'es, but you don't want to apply, you execute 'rebootxscf'
for reboot.
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
applynetwork(8), rebootxscf(8), shownetwork(8)