Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 264

setntp(8)
250 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised October 2010
Displays usage statement. When used with other options or
-h
operands, an error occurs.
-i stratum_no Specifies the stratum value. This option is used together with the
"-c stratum". An integer from 1 to 15 can be specified. If the
stratum value not specified, it is 5.
-m type=value Sets the preferred server or the local clock of XSCF. You can
specify either of the following for type:
prefer
localaddr
When prefer is specified for type, either of the following can be
specified for value:
on
off
When localaddr is specified for type, specify the least
significant byte of the clock address of the local clock 127.127.1.x
for value. A numeric from 0 to 3 can be specified. The default is
0, and the clock address of the local clock at this time is
127.127.1.0.
Specifies whether priority should be given
to the NTP server at the top of the registered
list at the time of synchronization.
Sets the local clock of XSCF.
That server is the first choice and
alternatives servers are given preference in
order of increasing stratum value, from
lowest to the highest. The default value is
on.
The same preferences are given with no
priority for the server at the top of the list.