Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 59

EXAMPLE 5
XSCF> cfgdevice -l
Current connection for DVD/DAT: port 0-0
Expander status
Port No. IOU/SAS-status SAS-status
-----------------------------------
EXAMPLE 6
XSCF> cfgdevice -y -c attach -p 0-0
Are you sure you want to attach the device [y|n] :y
Completed.
EXAMPLE 7
XSCF> cfgdevice -q -y -c attach -p 0-0
EXIT STATUS The following exit values are returned:
0
>0
Displays the status of individual CD-RW/DVD-RW drive unit and the tape
drive unit set on the M9000 server with the expansion cabinet.
Main chassis:
Expansion chassis: port 8-0
0-0 enable up
0-2 disable down
0-4 disable down
0-6 disable down
1-0 disable down
1-2 disable down
1-4 disable down
1-6 disable down
2-0 disable down
2-2 disable down
2-4 disable down
2-6 disable down
8-0 enable up
8-2 disable down
8-4 disable down
8-6 disable down
Connects the CD-RW/DVD-RW drive unit and the tape drive unit to port 0-
0 when the system is being powered on. Automatically answers "y" to all
prompts.
Connects the CD-RW/DVD-RW drive unit and the tape drive unit to port 0-
0 when the system is being powered on. Automatically answers "y" to all
prompts without displaying messages.
Successful completion.
An error occurred.
port 0-0
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
enable up
cfgdevice(8)
System Administration 45