Showsnmp - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showsnmp - display the configuration information and current status of the SNMP
agent
SYNOPSIS

showsnmp

showsnmp -h
DESCRIPTION showsnmp(8) displays the configuration and information and current status of the
SNMP agent. This includes: agent status, port, system location, contact and
description, traphosts, SNMP version, and any enabled MIB modules.
Privileges You must have platadm, platop, or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
-h
EXAMPLES
EXAMPLE 1
EXAMPLE 2
Displays usage statement.
Displaying SNMP Information for a System That Has Not Been Set Up
XSCF>
showsnmp
Agent Status:
Agent Port:
System Location:
System Contact:
System Description: Unknown
Trap Hosts: None
SNMP V1/V2c: None
Enabled MIB Modules: None
Displaying SNMP Information for a Disabled System Set Up With SNMPv3
Trap Host
XSCF> showsnmp
Agent Status:
Agent Port:
System Location:
System Contact:
System Description: FF1
Trap Hosts:
Hostname Port
Disabled
161
Unknown
Unknown
Disabled
161
SanDiego
bob@jupiter.west
Type Community String
showsnmp(8)
Username Auth Protocol
System Administration 473