Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 135

*Note*
EXAMPLE 3
XSCF> poweroff -f -d 0
DomainIDs to power off:00
The -f option will cause domains to be immediately resets.
Continue? [y|n]:y
00:Powering off
*Note*
EXAMPLE 4
XSCF> poweroff -y -d 2
DomainIDs to power off:02
Continue? [y|n]:y
02:Powering off
*Note*
EXAMPLE 5
XSCF> poweroff -q -y -d 2
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO poweron(8), reset(8), showdomainstatus(8)
This command only issues the instruction to power-off.
The result of the instruction can be checked by the "showlogs power".
Forcibly turns off power to domains with domain IDs 0.
This command only issues the instruction to power-off.
The result of the instruction can be checked by the "showlogs power".
Turns off power to domains with domain IDs 2. Automatically replies with
"y" to the prompt.
This command only issues the instruction to power-off.
The result of the instruction can be checked by the "showlogs power".
Turns off power to domains with domain IDs 2. Automatically replies with
"y" without displaying the prompt.
Successful completion.
An error occurred.
poweroff(8)
System Administration 121