Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 230

sethttps(8)
EXAMPLES
216 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2012
When you use sethttps(8) command to disable the HTTPS service (sethttps
■
-c disable), the HTTPS service is disabled immediately. At this time, any
opened HTTPS sessions are terminated.
For all other settings using the sethttps(8) command, you must reboot the
XSCF using the rebootxscf(8) command for the changes to take effect.
Using the showhttps(8) command you can check the current settings in relation
■
to the HTTPS service.
Starts the HTTPS service.
EXAMPLE 1
XSCF> sethttps -c enable
Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the https settings.
Stops the HTTPS service.
EXAMPLE 2
XSCF> sethttps -c disable
Creates a CSR with the following settings: country: JP, state|province:
EXAMPLE 3
Kanagawa, locality: Kawasaki, organization: Example, organizationalunit:
development, common: scf-host, e-mail: abc@example.com
XSCF> sethttps -c gencsr JP Kanagawa Kawasaki Example \
development scf-host abc@example.com
Creates the self-certification authority with the following settings, and
EXAMPLE 4
creates a self-signed web server certificate:country: JP, state|province:
Kanagawa, locality: Kawasaki, organization: Example, organizationalunit:
development, common: scf-host, e-mail: abc@example.com
XSCF> sethttps -c selfsign JP Kanagawa Kawasaki Example \
development scf-host abc@example.com
CA key and CA cert already exist. Do you still wish to update? [y|n] :y
Enter passphrase:
Verifying - Enter passphrase:
Creates the private key of the web server.
EXAMPLE 5
XSCF> sethttps -c genserverkey
Server key already exists. Do you still wish to update? [y|n] :y
Enter passphrase:
Verifying - Enter passphrase:
Creates the private key of the web server. Automatically replies with "y" to
EXAMPLE 6
the prompt.
XSCF> sethttps -c genserverkey -y