Setad - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

setad(8)

NAME setad - configure Active Directory
SYNOPSIS setad enable|disable
setad loadcert [[-q] -{y|n}] [-i n] [-u username] [-p proxy [-t proxy_type]] URI
setad loadcert [[-q] -{y|n}] [-i n] console
setad rmcert [[-q] -{y|n}] [-i n]
setad group administrator -i n name [groupname]
setad group operator -i n name [groupname]
setad group custom -i n name [groupname]
setad group custom -i n roles [privileges]
setad userdomain -i n [domainname]
setad defaultrole [privileges]
setad timeout seconds
setad server [-i n] [ipaddr [:port]]
setad logdetail none|high|medium|low|trace
setad log [[-q] -{y|n}] clear
setad dnslocatormode|expsearchmode|strictcertmode enable|disable
setad dnslocatorquery -i n [service ]
setad default [[-q] -{y|n}]
setad -h
DESCRIPTION setad(8) configures Active Directory. To simply enable or disable Active Directory,
execute the command with only those operands. To enable or disable an Active
Directory mode, such as dnslocatormode, specify the mode along with enable or
disable.
To clear or unset a property, issue a setad command with no value for the
operand. For example, setad group custom -i 1 name clears the name
property from custom group 1. If a property is not set, it is displayed with no value.
Note – If you are an Active Directory or LDAP/SSL user, do not upload a public
key. If one has already been uploaded, use the following command to delete it:
XSCF> setssh -c delpubkey -a -u proxyuser
Privileges You must have useradm privileges to run this command.
System Administration 155