Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 234

setldap(8)
EXAMPLES
220 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010
Sets the primary and secondary LDAP servers and ports.
-s servers
servers is a comma-separated list of server:port. Ports are
specified numerically and servers can be specified either by
name or IP address in the dotted decimal format. For example,
10.8.31.14.636,company:636. The first server in the list is
the primary. Server names must be resolvable. Maximum name
length is 128 characters.
Tests connections to all configured LDAP servers. Attempts to
-t user
retrieve the password data for the specified user from each
configured server and reports success or failure in each case.
Sets the maximum time allowed for an LDAP search before it
-T timeout
returns search results.
Configuring Bind Name
EXAMPLE 1
XSCF> setldap -b user -p
Password: <Enter password>
XSCF> showldap
Bind Name:
Base Distinguished Name: Not set
LDAP Search Timeout:
Bind Password:
LDAP Servers:
CERTS:
Configuring Base Distinguished Name
EXAMPLE 2
XSCF> setldap -B
XSCF> showldap
Bind Name:
Base Distinguished Name: ou=people,dc=company,dc=com
LDAP Search Timeout:
Bind Password:
LDAP Servers:
CERTS:
Setting the LDAP Timeout
EXAMPLE 3
XSCF> setldap -T 60
XSCF> showldap
Bind Name:
Base Distinguished Name: ou=people,dc=company,dc=com
LDAP Search Timeout:
user
0
Set
None
None
ou=people,dc=company,dc=com
user
0
Set
None
None
user
60