Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 274

setpasswordpolicy(8)
260 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised May 2011
-l lcredit Sets the maximum credit for lowercase letters in a password. The
minimum acceptable password length is decreased by one for each
lowercase letter in the password, up to lcredit value. Valid values
are integers with value of 0 - 999999999. The initial setting is 1. See
EXAMPLE 2.
-M maxdays Sets the maximum number of days that a password is valid. This
value is assigned to new user accounts when they are created. The
initial value is 999999.
Valid values are integers with value of 0 - 999999999.
-m minlen Sets the minimum acceptable password length if no password
credits are applied. If credits are specified by options -d, -u, -l,
and -o, the required password length is reduced when the
specified character types are used.
Note - Passwords cannot contain fewer than 6 characters regardless of
credits.
Valid values are integers with value of 6 - 99999999. See
EXAMPLE 2.
-n mindays Sets the minimum number of days between password changes. An
initial value of zero for this field indicates that you can change the
password at any time. This value is assigned to new user accounts
when they are created.
Valid values are integers with value of 0 - 999999999.
-o ocredit Sets the maximum credit for nonalphanumeric characters in a
password. The minimum acceptable password length is decreased
by one for each nonalphanumeric character in the password, up to
ocredit value. Valid values are integers with value of 0 - 999999999.
The initial setting is 1. See EXAMPLE 2.
-r remember Sets the number of passwords remembered in password history.
Valid values are integers 1 - 10. The initial setting is 3. A zero
value is not supported and will prevent further password
modification by the user.