Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 24

Intro(1)
10 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2011
showroute
showshutdowndelay
showsmtp
showsnmp
showsnmpusm
showsnmpvacm
showssh
showstatus
showsunmc
showtelnet
showtimezone
showuser
snapshot
switchscf
testsb
traceroute
display routing information for an XSCF
network interface
display the shutdown wait time at power
interruption of the uninterruptible power
supply (UPS)
display the Simple Mail Transfer Protocol
(SMTP) configuration information
display the configuration information
and current status of the SNMP agent
display the current User-based Security
Model (USM) information for the SNMP
agent
display the current View-based Access
Control Access (VACM) information for
the SNMP agent
display the settings of the Secure Shell
(SSH) service that configured for the
XSCF network
display the degraded Field Replaceable
Units (FRUs)
show setup information and status of
Sun Management Center agent
display the current status of the Telnet
service for the XSCF network
display the XSCF time zone and Daylight
Saving Time information of current
settings
display user account information
collect and transfer environment, log,
error, and FRUID data
switch the XSCF unit between the active
and standby states
perform an initial diagnosis of the
specified physical system board (PSB)
display the route packets take to the
specified network host or the network
device