Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 165

setdefaults : FACTORY mode clear : /bin/rm /var/log/lastlog >/dev/null
2>&1
setdefaults : FACTORY mode clear : /bin/rm /var/log/boot.log >/dev/null
2>&1
...
setdefaults : FACTORY mode clear : /bin/rm /hcpcommon/tmp/
panel_up_to_date_fail >/dev...
setdefaults : FACTORY mode clear : log data clear complete
setdefaults : FACTORY mode clear : NVRAM(PAGE#0) clear complete
...
setdefaults : FACTORY mode clear : NVRAM(PAGE#7) clear complete
setdefaults : FACTORY mode clear : NVRAM reset complete
...
setdefaults : FACTORY mode clear : unmount filesystem start
dbs[283]: NOTICE: received signal: 15
setdefaults : FACTORY mode clear : unmount /hcp0/linux
...
setdefaults : FACTORY mode clear : unmount /hcpcommon/firmtmp
complete
setdefaults : FACTORY mode clear : unmount filesystem complete
Please stand by while rebooting the system.
Restarting system.
XSCF uboot
XSCF uboot
SCF board boot factor = 4040
XSCF BOOT STOP (recover by NFB-OFF/ON)
The following exit values are returned:
EXIT STATUS
0
>0
01950000
01950000
DDR Real size: 512 MB
DDR: 480 MB
Successful completion.
An error occurred.
(Apr 15 2007 - 11:08:18)
(Apr 15 2007 - 11:08:18)
restoredefaults(8)
--
System Administration 151