To Obtain The Ok Prompt - Fujitsu SPARC Enterprise T2000 Administration Manual

To Obtain the ok Prompt

▼
1. Decide which method you need to use to reach the ok prompt.
See "OpenBoot ok Prompt" on page 21
2. Follow the appropriate instructions in
Ways of Accessing the ok Prompt
TABLE 1-3
Access Method
Graceful shutdown of
the Solaris OS
L1-A (Stop-A) keys or
Break key
ALOM CMT break
and console
commands
Manual system reset
* Requires the OpenBoot configuration variable input-device=keyboard. For more information, see
cessing the System Console Through a Local Graphics Monitor" on page 15
Configuration Variable Settings" on page
for details.
TABLE 1-3
What to Do
From a shell or command tool window, issue an appropriate
command (for example, the shutdown or init command) as
described in Solaris system administration documentation.
• From a keyboard connected directly to the SPARC Enterprise
T2000 server, press the Stop and A keys simultaneously.
–or–
• From an alphanumeric terminal configured to access the system
console, press the Break key.
From the sc> prompt, type the break command. Then issue the
console command, provided the operating system software is
not running and the server is already under OpenBoot firmware
control.
From the sc> prompt, type:
sc> bootmode bootscript="setenv auto-boot? false"
Press Enter.
then type:
sc> reset
26.
Chapter 1 Configuring the System Console
.
and "System Console OpenBoot
*
"Ac-
25