Openboot Configuration Variables - Fujitsu SPARC Enterprise T2000 Administration Manual

A
A P P E N D I X

OpenBoot Configuration Variables

TABLE A-1
volatile memory on the system. The OpenBoot configuration variables are printed
here in the order in which they appear when you issue the showenv command.
OpenBoot Configuration Variables Stored on the System Configuration Card
TABLE A-1
Variable
local-mac-address?
fcode-debug?
scsi-initiator-id
oem-logo?
oem-banner?
ansi-terminal?
screen-#columns
screen-#rows
ttya-rts-dtr-off
ttya-ignore-cd
describes the OpenBoot firmware configuration variables stored in non-
Possible Values Default Value
true, false true
true, false false
0-15 7
true, false false
true, false false
true, false true
0-n 80
0-n 34
true, false false
true, false true
Description
If true, network drivers use their own
MAC address, not the server MAC
address.
If true, include name fields for plug-in
device FCodes.
SCSI ID of the Serial Attached SCSI
controller.
If true, use custom OEM logo; otherwise,
use the server manufacturer's logo.
If true, use custom OEM banner.
If true, enable ANSI terminal emulation.
Sets number of columns on screen.
Sets number of rows on screen.
If true, operating system does not assert
rts (request-to-send) and dtr
(data-transfer-ready) on serial management
port.
If true, operating system ignores carrier-
detect on serial management port.
67