Fujitsu SPARC Enterprise T2000 Administration Manual page 91

OpenBoot Configuration Variables Stored on the System Configuration Card (Continued)
TABLE A-1
Variable
diag-switch?
error-reset-recovery
network-boot-
arguments
Possible Values Default Value
true, false false
boot, sync, boot
none
[protocol, ] none
[key=value, ]
Description
If true:
• OpenBoot verbosity is set to maximum
If false:
• OpenBoot verbosity is set to minimum
Command to execute following a system
reset generated by an error.
Arguments to be used by the PROM for
network booting. Defaults to an empty
string. network-boot-arguments can be
used to specify the boot protocol
(RARP/DHCP) to be used and a range of
system knowledge to be used in the
process. For further information, see the
eeprom (1M) man page or your Solaris
Reference Manual..
Appendix A OpenBoot Configuration Variables 69