Install The Hardware - Axis A1001 Installation Manual

Auxiliary Connector
A
I/O configured as input
B
I/O configured as output

Install the Hardware

CAUTION
Never mount the Axis product while power is applied to the product. Always apply power
at the end of the installation.
NOTICE NOTICE NOTICE
To protect the circuits against electrostatic discharge (ESD), use ESD protection when
handling the product while the components and contacts are exposed.
Read all the instructions before installing the product.
• To configure the hardware, see page 23.
• To install the product on a wall (preferred) or ceiling, see page 24.
To install the product on a DIN rail, see page 25.
•
• To connect the cables, see page 26.
AXIS A1001 Network Door Controller
22