Network Setup - Samsung SNP-5300 User Manual

setup screen

networK Setup

interface
1. From the Setup menu, select the
<network (
2. Click <interface>.
3. Set the <interface> and <ipv6 setup>
as necessary.
• IP type : Select an IP connection type.
- Manual : Specify the IP address,
Subnet mask, Gateway, DNS1,
and DNS2.
- DHCP : Specify the DNS1 and
DNS2.
- PPPoE : Specify the DNS1, DNS2,
Name and Password.
If you set it to <Manual>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
`
• MAC address : Shows the MAC address.
• IP address : Displays the current IP address.
• Subnet mask : Displays the <Subnet mask> for the set IP.
• Gateway : Displays the <Gateway> for the set IP.
• DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
4. Set the <ipv6 setup>.
• IPv6 use : Specify the use of IPv6.
• Default IPv6 Address : Obtains the IPv6 address to access the IPv6 network.
- Use Default Address Only : Use only the default IPv6 address.
- Obtain IP address via DHCP : Display and use the IPv6 address obtained from
the DHCP server.
- Use the following IP Address : Enter an IP address manually and use it.
5. When done, click [apply (
The IP addressing system will be defaulted to DHCP.
`
J
If no DHCP server is found, the previous settings will be restored automatically.
Once completed with editing, click [Apply (
`
After a while, connect again with the changed IP.
80_ setup screen
)> tab.
)].
)] to apply changes and the browser exits.