Samsung SNP-5300 User Manual page 116

appendix
PROBLEM
No file is transferred via e-mail
on occurrence of intelligent video
analysis event of camera even
when the <IV analysis function> is
set to <Enable>.
Can <Set Rules> be configured
even when the <IV analysis
function> is set to <Disable>?
No signal is found at the Alarm
Output port even when an
intelligent video analysis event is
generated.
Cannot record into the SD memory
card.
SD memory card is inserted but
the camera does not operate
properly.
Cannot format the SD memory
card.
116_ appendix
y Verify the settings in the following sequence:
A. Check <Data & Time> settings.
B. The <IV analysis function> should be set to <Enable>.
C. Alarm Video Transmission must be enabled.
y Yes, it can be. You can set rules for events despite of the intelligent
video analysis setting.
y Check alarm output port settings.
y Check if the memory card is defective.
y Check if the write protection tab of the memory card is set to "LOCK".
y Check if the memory card is inserted in the proper direction. Operation
of memory card that is formatted by other devices is not guaranteed with
this camera unit
y Format the memory card again in <Setup>  <Event>  <SD Record>
menu.
y Check if the write protection tab of the memory card is set to "LOCK".
SOLUTION