Samsung SNP-5300 User Manual page 97

• virtual line based rules
1. Set <iv analysis function> to
<enable>.
2. Set the type to <Line/area>.
The virtual line based rules can be specified
`
only if the intelligence video analysis type is
set to <Line/Area>.
3. Set the event rule to <virtual line based
rules>.
4. Click on both starting and ending points for the line on the screen to display the popup
dialog.
5. Select a desired <virtual Line Based rules>.
• Right : A movement from left to right in the virtual line will be detected.
• Left : A movement from right to left in the virtual line will be detected.
• Both : A movement in any direction in the virtual line will be detected.
6. Click [oK].
To cancel the specified line, hover the mouse over the line and right-click to display
the context menu. Select [Delete] or [clear (
7. When done, click [apply (
• Defined area based rules
1. Set <iv analysis function> to
<enable>.
2. Set the type to <Line/area>.
3. Set the event rule to <Defined area
based rules>.
4. Click a corner point of a desired area in
the video to display the popup window.
5. Select a desired <Defined area Based
rules>.
• Entering : This event rule detects an event of object's center entering into the
defined area from outside through the boundary of the area.
• Exiting : This event rule detects an event of object's center exits from the inside of
the defined area through the boundary of the area.
6. Click [oK].
To cancel the specified area, hover the mouse over the area and right-click to display
the context menu. Select [Delete] or [clear (
7. When done, click [apply (
)].
)].
)].
)].
English _97