Samsung SNP-5300 User Manual page 55

to toggle the audio sound
1. Click the [audio (
The corresponding button will be
displayed in the Viewer.
2. Click the button to listen to / mute the
sound as you wish.
This button operates as a toggle button.
to toggle the microphone sound
1. Click the [mic (
The corresponding button will be
displayed in the Viewer.
"Any available audio capture device
J `
cannot be found!" message appears if
there is no Microphone.
2. Click the button to start / stop talking.
This button operates as a toggle button.
The Silverlight permission dialog appears when you click the microphone button.
As the AUDIO and MIC buttons (
`
J
the viewer screen, you cannot control the actual operations of those buttons. So if you want to
adjust the microphone or audio settings, use the toggle button on the viewer screen.
to fit the full screen
1. Click the [full Screen (
The corresponding button will be displayed in the Viewer.
2. Click the button.
This will fit the Viewer to the full screen.
3. To exit the full screen mode, press [esc] on the keyboard.
For the ActiveX viewer, you can just click an appropriate button on the page to perform the operation
J `
as the audio I/O buttons and the Full Screen button are not displayed in the top of the screen.
)] button.
)] button.
,
)] button.
) are simply to display or hide the toggle button on
English _55