Samsung SNP-5300 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SNP-5300
  6. User manual

Samsung SNP-5300 User Manual

Hide thumbs Also See for SNP-5300:
Table of Contents

Advertisement

Quick Links

NETWORK CAMERA

User Manual

SNP-5300/SNP-5300H

Advertisement

Table of Contents
loading

Related Manuals for Samsung SNP-5300

Summary of Contents for Samsung SNP-5300

  • Page 1: Network Camera

    NETWORK CAMERA User Manual SNP-5300/SNP-5300H...
  • Page 2 Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

  • Page 3: Important Safety Instructions

    overview important Safety inStructionS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

  • Page 4: Explanation Of Graphical Symbols

    overview warninG TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. These servicing instructions are for use by qualified service personnel only.
  • Page 6 overview Please read the following recommend safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not place this apparatus near conductive material. y Do not attempt to service this apparatus yourself. y Do not install near any magnetic sources. y Do not block any ventilation openings.

  • Page 7: Table Of Contents

    Important Safety Instructions Product Features Recomended PC Specifications Recomended SD/SDHC Memory Card Specifications What’s Included At a Glance (SNP-5300) At a Glance (SNP-5300H) iNSTALLATioN & Connecting with other Device CoNNeCTioN Installation Inserting/Removing a SD Memory Card Memory Card Information...

  • Page 8: Web Viewer

    overview web vieweR Connecting to the Camera Login Installing ActiveX Installing Silverlight Runtime Using the Live Screen Playing the recorded video SeTup SCReeN Setup Audio & Video Setup Network Setup Event Setup System Setup AppeNDix Specification Product Overview Troubleshooting Open source license notification on the product 8_ overview...

  • Page 9: Product Features

    proDuct featureS • full HD video Quality • multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. • web Browser-based monitoring Using the Internet web browser to display the image in a local network environment. •...

  • Page 10: Recomended Pc Specifications

    overview recomenDeD pc SpecificationS • CPU : Intel Core 2 Duo 2.6GHz or higher • Operating System : Microsoft Windows 7/VISTA/XP SP3, Apple MAC OS • Resolution : 1280X1024 pixels or higher • RAM : 2GB or higher • Web Browser : Firefox, Google Chrome, *Apple Safari, Windows Internet Explorer 9.0 (32bit)/8.0(32bit)/7.0(32bit) Neither a beta test version unlike the version released in the company website nor the developer version will be supported.

  • Page 11: What's Included

    Appearance Item Name Quantity Description Model Name Camera Instruction book, Installer S/W CD, CMS S/W DVD SNP-5300 or SNP-5300H Quick Guide (Optional) Warranty card (Optional) If installing it indoors or in a Installation base ceiling housing Used for installation on the...
  • Page 12 overview Appearance Item Name Quantity Description Model Name Used for attaching the Hexagon screw installation base to the camera Used for fixing the installation L Wrench base after attaching it to the SNP-5300H camera Installation base Bracket for mounting outdoors 12_ overview...

  • Page 13: At A Glance (Snp-5300)

    GLance (Snp-5300) appearance Item Description Main unit Protect the internal PTZ mechanism from the direct sunlight. Dome Cover Dome cover for the lens and unit protection. SD Memory Card Compartment for the SD memory card. Compartment After Service Port This is for the repair purpose only that is not available for the user.
  • Page 14 overview Bottom view of installation inner view of installation Base Base Item Description Safety Cable Connect the cable to prevent the product from dropping during installation to Connection Ring the ring. Alarm I/O Port Used to connect the alarm I/O cable. Network Used to connect a PoE+ or LAN cable.

  • Page 15: At A Glance (Snp-5300H)

    at a GLance (Snp-5300H) appearance Item Description Protects the internal PTZ mechanism from the direct sunlight, rain or Main unit external impact. Dome Cover Dome cover for the lens and unit protection. Safety Cable The cable prevents the product from dropping during installation. English _15...
  • Page 16 overview inside Item Description SD Memory Card Compartment for the SD memory card. Compartment Pressing and holding this button for about 5 seconds will reset all camera Reset Button settings to the factory default. After Service Port This is for the repair purpose only that is not available for the user. (A/S port) 16_ overview...
  • Page 17 Bottom view of installation inner view of installation Base Base Item Description Safety Cable Connect the cable to prevent the product from dropping during installation to Connection Ring the ring. Alarm I/O Port Used to connect the alarm I/O cable. Network Used to connect a PoE+ or LAN cable.

  • Page 18: Installation & Connection

    installation & connection ` camera wiring interface Board For the camera wiring, please refer to the picture below. Audio Audio Power Supply AC24V 2.5A Power Input Ground ETHERNET Camera’s 3.3V internal Alarm Input Sensor Sensor Alarm input Select Normal Open in the setup menu. The sensor input is activated during a short for contact type, or when it is at “Low”...

  • Page 19: Connecting With Other Device

    connectinG witH otHer Device preparing adapter and cable Connect the camera to the power adaptor. Then, plug the power cord of the adaptor to the wall outlet. IN1 IN2 IN3 IN4 GND OUT1 OUT2 AUDIOIN AUDIOOUT-L Check out the rated voltage and current before making connections. Rated Power Allowable Input Voltage Current Consumption...

  • Page 20: Ethernet Connection

    installation & connection electrical resistance of copper wire at [20°c (68°f)] Copper Wire Gauge (AWG) #24(0.22mm ) #22(0.33mm ) #20(0.52mm ) #18(0.83mm Resistance (Ω/m) 0.078 0.050 0.030 0.018 Drop Voltage (V/m) 0.028 0.018 0.011 0.006 Recommended Distance (m) Less than 20 Less than 30 Less than 30 Less than 30...

  • Page 21: Installation

    & installing camera Bracket For installation guidelines for brackets and housings, refer to the installation manual that is enclosed with the bracket or housing. ` available Bracket models Model Item SNP-5300 SNP-5300H SHP-3701H Outdoor Housing SHP-3701F Ceiling-mount Housing SBP-300HM3...
  • Page 22 installation & connection installing by surface attachment SNP-5300H cannot be installed on the surface of a wall or ceiling. ` attaching template & installing installation base 1. Attach the provided template on the ceiling. Based on the template, drill a 86mm hole in the ceiling and arrange the wires through the hole.
  • Page 23 ` connect terminal wires 1. Connect the cables to the terminal block on the hinged door. Refer to “camera wiring interface Board”. (page 18) 2. Once the wiring is complete, close the hinged door. Do not connect the camera to a power outlet until the installation is complete.
  • Page 24 installation & connection - To attach or detach the camera, refer to the picture. • Attaching the Camera : Push up the camera unit and rotate it clockwise until it cannot be rotated anymore, as shown in the figure. After rotation, fasten the screws assembled to the install base.

  • Page 25: Installing By Wall Mount

    installing by wall mount ` fix the installation base with the bracket 1. Fix the base with the bracket by turning it clockwise. 2. As shown in the picture below, gently press and lift up the handle of the hinged door on the bottom of the installation base.
  • Page 26 installation & connection 4. Assemble Camera and Installation Base Assemble the installation base and camera by matching the installation direction guides. 5. Attach Camera Rotate the mounted camera unit clockwise so that the reference indicators of top and bottom are as shown in the image on the right. 6.
  • Page 27 notes for waterproofing This product is an indoor unit. If it is installed outdoors, use the outdoor housing to make it waterproof. ` installing the unit on the wall by combining the outdoor housing and wall mount 1. Install the wall mount on the vertical wall. Concrete wall If the mount is installed on an inclined Silicon...

  • Page 28: Optional Accessories For Installation

    installation & connection ` installing on the wall by combining the outdoor housing and ceiling mount adapter 1. Wrap the screw part of the housing Concrete ceiling with a sufficient amount of Teflon tape for assembly. 2. When separating the dome cover and Silicon Ceiling mount fastening it to the housing frame, make...
  • Page 29 • Wall mount (SBP-300WM) 2. If installing the camera on the ceiling • Ceiling Mount (SBP-300CM) 3. If installing the wall mount (SBP-300WM/SBP-300WM1) on an at least 80mm-long cylinder • Pole Mount (SBP-300PM) English _29...
  • Page 30 4. If installing the wall mount (SBP-300WM/SBP-300WM1) on a corner of the wall • Corner Mount (SBP-300KM) 5. If installing on a building rooftop • Parapet Mount (SBP-300LM) 6. If installing SNP-5300 outdoors • Outdoor Housing (SHP-3701H) 30_ installation & connection...
  • Page 31 7. If installing SNP-5300 on a ceiling as built-in component • Flush-Mount Indoor Housing for PTZ Dome Camera (SHP-3701F) 8. If installing SNP-5300 in the wall mount or ceiling mount • Hanging Mount (SBP-300HM3) English _31...

  • Page 32: Inserting/Removing A Sd Memory

    Disconnect the power cable from the camera before inserting the SD memory card. inserting a SD memory card 1. Open the cover in the rear of the camera. (SNP-5300) Using the screw driver, loosen 3 screws by turning them counterclockwise and separate the dome cover.

  • Page 33: Memory Card Information

    removing a SD memory card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the slot when released.

  • Page 34: Network Connection And Setup

    network connection and setup You can set up the network settings according to your network configurations. connectinG tHe camera DirectLy to LocaL area networKinG connecting to the camera from a local pc in the Lan 1. Launch an Internet browser on the local PC. 2.

  • Page 35: Connecting The Camera Directly To A Dhcp

    connectinG tHe camera DirectLy to a DHcp BaSeD DSL/caBLe moDem INTERNET DSL/Cable External Remote PC Modem Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 36: Modem

    network connection and setup connectinG tHe camera DirectLy to a pppoe moDem INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 37: Pppoe/Cable Modem

    connectinG tHe camera to a BroaDBanD router witH tHe pppoe/caBLe moDem This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband External Remote Cable Modem Cable Modem Router Camera DDNS Server (Data Center, KOREA) Local PC...

  • Page 38: Buttons Used In Ip Installer

    network connection and setup ButtonS uSeD in ip inStaLLer e f g Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented.

  • Page 39: Static Ip Setup

    Exits the IP Installer program. For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www.samsungcctv.com). Static ip Setup manual network Setup Run <ip installer_v2.XX.exe>...
  • Page 40 network connection and setup 3. In the <address> pane, provide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requires no user setting. You can configure the static IP settings only if the DHCP checkbox is unchecked.
  • Page 41 if using a Broadband router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The <Subnet mask> of the Broadband Router will be the <Subnet mask>...

  • Page 42: Auto Network Setup

    network connection and setup auto network Setup Run <ip installer_v2.XX.exe> to display the camera search list. At the initial startup, both [auto Set] and [manual Set] will be grayed out. For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.

  • Page 43: Dynamic Ip Setup

    Dynamic ip Setup Dynamic ip environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN checking the Dynamic ip 1.

  • Page 44: Manual Port Range Forwarding

    network connection and setup port ranGe forwarD (port mappinG) Setup If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. manual port range forwarding 1.
  • Page 45 Setting up port range forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. If you don’t set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the camera.

  • Page 46: Connecting To The Camera From A Shared Local Pc

    network connection and setup connectinG to tHe camera from a SHareD LocaL pc 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera.

  • Page 47: Connecting To The Camera

    web viewer connectinG to tHe camera normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...
  • Page 48 To register your device to the <DDnS> server, visit www.samsungipolis.com and register your device first, and then set the Web Viewer’s <network> - <DDnS> to <Samsung DDnS>, as well as providing <product iD> that had been used for DDNS registration.

  • Page 49: Installing Activex

    inStaLLinG activeX If connecting to a camera for the first time, you will see the installation message. Then, install the required ActiveX to access the camera and control the video from it in real time. 1. When accessing the start screen of the monitoring page, click the yellow warning message in the top of the page.

  • Page 50: Installing Silverlight Runtime

    web viewer inStaLLinG SiLverLiGHt runtime If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. 1. Click <click Here>. 2.
  • Page 51 5. When done, click <close>. 6. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen. For normal installation, set the Block Popup setting as follows: ex) Internet Explorer ...

  • Page 52: Using The Live Screen

    web viewer uSinG tHe Live Screen a b c Item Description Monitoring Move to the monitoring screen. Playback Switch to the monitoring screen that plays recording data in the SD memory. Setup Move to the Setup screen. Viewer Screen Displays the Live video on the screen. Auto Focus Fit the focus automatically.
  • Page 53 Item Description Hides the alarm indicator near the border of the viewer screen. In the following cases, the alarm message will pop up on the border of the viewer. Hide the alarm If an event (alarm, motion detection, video analysis, audio detection, face indicator detection, tampering detection) occurs If the camera is turned off...

  • Page 54: To Capture The Snapshot

    web viewer to enable the area Zoom mode From the viewer screen, right-click to display the context menu below: Menu items and descriptions • AreaZoom : Zoom the area selected with the mouse. • Goto 1X : Change the current zoom factor to x1. •...
  • Page 55 to toggle the audio sound 1. Click the [audio ( )] button. The corresponding button will be displayed in the Viewer. 2. Click the button to listen to / mute the sound as you wish. This button operates as a toggle button. to toggle the microphone sound 1.

  • Page 56: To Play The Content After Searching By Event

    web viewer to control the ptZ 1. Press the [ptZ ( )] button. 2. When the PTZ button bar appears on the screen, use the direction buttons to adjust the camera angle, zoom factor or focus to your preference. For further details on PTZ use, refer to “PTZ setup”.
  • Page 57 Item Description Search range setting Set the search date and time from the data saved in the SD memory card. Search event setting Set the event type to search within the search period. Event search Run the event search. 1. Click the [playback ( )] button.

  • Page 58: To Play After Searching By Time

    web viewer to play after searching by time Item Description Time bar The section in the specific period is played by moving the time bar. Set the search date using the calendar. Search date setting Dates for which there is video in the SD memory card are displayed within the boxes on the calendar.
  • Page 59 Item Description Video information Time data of the replayed video is displayed on the screen. Time zone is set to back up the video saved in the SD memory card. Backup Can be set as up to 5 minutes. The time search is not available with other web browsers than Internet Explorer. 1.
  • Page 60 web viewer to back up the searched video 1. Click [ ] on the scene to back up. Save as window appears. 2. Confirm the save path and click [Save] button. The selected data will be backed up to the specified path in .avi format. to play the backup video You can play the video stored (for the backup purpose) with Windows Media Player or VLC Media Player.

  • Page 61: Video Profile

    setup screen Setup You can configure the audio & video, network, event and system settings of the camera via the network. 1. In the Live screen, click [Setup ( 2. The Setup screen appears. auDio & viDeo Setup video profile 1.

  • Page 62: To Add A Video Profile

    setup screen to add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select a profile number. 2. Provide the name and select a codec. 3.

  • Page 63: Video Setup

    • Multicast(RTP) : Specify the use of the RTP protocol. - IPv4 : Enter an IPv4 address with which you can connect to the IPv4 network. - Port : Specify the video communication port. - TTL : You can set the TTL for the RTP packet. what is Gop size? GOP(Group of Pictures) is a set of video frames for H.264 compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame.

  • Page 64: Audio Setup

    setup screen to set the privacy zone You can specify a certain area of the camera video to be protected for your privacy. 1. Set it to <on>. 2. When done, click [apply ( 3. Select the color masking of desired privacy area.

  • Page 65: Ptz Setup

    4. Set the audio output level. • Enable : Sets whether to use audio output. • Gain : Sets the output audio gain. 5. When done, click [apply ( ptZ setup You can change the direction of lens and activate the zoom. 1.
  • Page 66 setup screen To add a preset 1. Select the preset number to add. 2. Set the name for the preset. 3. Press the [ ] button. To delete a preset 1. Select the preset number to delete. 2. Press the [ ] button.
  • Page 67 To set the home position 1. Move to a desired start screen point and press [ The point will be set to the home position. 2. Click [ ] in the home position. You will move to the predetermined home position.
  • Page 68 setup screen To set a group The group function enables you to group various presets before calling them in sequence. Each group can contain up to 128 presets. 1. Set <mode> in <Sequence setup> to <Group>. The menu screen will switch to the group setting screen.
  • Page 69 3. Press the [ ] button. Your settings will be entered in the right list. 4. Press the [ ] button. Set data on the right list will be saved. 5. Press the [ ] button. It performs the tour operation. 6.
  • Page 70 setup screen To set the auto run This feature will activate the predefined sequence function if the user does not manipulate anything on the product for a certain time. 1. Set <mode> in <Sequence setup> to <trace & auto run>. The menu screen will switch to the PTZ tracking and Auto execution menu screen.
  • Page 71 • Tilt range : The tilt limiting range is selected. • Action : PT limiting operation is set. ] : Start limit setting. ] : Provide the start and end points. ] : If you want to change the point setting, click this to return to the input dialog.

  • Page 72: Camera Setup

    SSDr (Samsung Super Dynamic range) Setup In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness.
  • Page 73 white balance Setup You can correct the image colors based on white under any lighting conditions. 1. Select <white balance>. 2. Select <mode>. • ATW : Corrects the colors of the camera video automatically. • Manual : You can adjust the red and blue gains of the camera video manually.
  • Page 74 setup screen BLc Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select <Backlight>. 2. Set <mode> to <BLc>. 3. Select each item and set it properly. • BLC level : You can change the level to adjust the brightness of the monitoring area.
  • Page 75 wDr Setup You can set to display a sharp image of the objects in a scene where both bright and dark areas exist. 1. Select <Backlight>. 2. Set <mode> to <wDr>. 3. Select each item and set it properly. • WDR Black Level : This adjusts the brightness of the light area.
  • Page 76 setup screen For the best WDR performance, it is recommended to set the Iris mode to <Auto>. Since the auto focus operation can be repeated depending on the lighting condition if user backlight compensation is used, it is recommended to use the focusing mode of <One Shot AF> or <Manual>.
  • Page 77 • Sens-up limit : Set the work condition to Auto mode in a low contrast scene. • Iris : You can set the camera iris to Auto or Manual to your preference. - Auto : Automatically sets the iris adaptively to the ambient lighting and shutter speed.

  • Page 78: Focus Setup

    setup screen • Dwell time : This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes. • Duration : Specify the time interval of lighting at which the sequence operation is triggered.
  • Page 79 oSD Setup 1. Select <oSD>. 2. Select each item and set it properly. • Camera title : Specify whether or not to display the camera title on the screen. You can enter up to 15 characters for the title. • Camera title position X, Y : Specify the coordinates where the camera title is displayed on the screen.

  • Page 80: Network Setup

    setup screen networK Setup interface 1. From the Setup menu, select the <network ( )> tab. 2. Click <interface>. 3. Set the <interface> and <ipv6 setup> as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
  • Page 81 Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security policy. • Device port : Set a port used to transfer video signals with the Samsung protocols. • RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
  • Page 82 DDNS server provided by Samsung Techwin. - Product ID : Enter the product ID that is registered with the Samsung DDNS service. • Public DDNS : Select one of provided public DDNS servers when you use a public DDNS server.

  • Page 83: Registering With Ddns

    DDnS to register your product with the Samsung DDnS 1. Visit the iPOLiS web site(www. samsungipolis.com) and sign in with a registered account. 2. From the top menu bar, select <DDnS Service> - <my DDnS>. 3. Click [proDuct reGiStration].
  • Page 84 Samsung DDnS in camera setup 1. From the DDNS setup page, set <DDnS> to <Samsung DDnS>. 2. Provide the <product iD> that you registered product ID with the DDNS site. 3. Click [apply (...
  • Page 85 ip filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <network ( )> tab. 2. Click <ip filtering>. 3. Select <filtering type>. • Deny : If selecting this, access from those IPs that are added to the filtering will be restricted.
  • Page 86 setup screen You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the <network ( )> tab. 2. Click <SSL>. 3. Select a secure connection system. To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP>”.
  • Page 87 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the <network ( )> tab. 2. Click <802.1x>. 3. Set the <ieee 802.1x Setting(eapoL using eap-tLS)>. • Enable IEEE 802.1x : Specify the use of the 802.1x protocol.
  • Page 88 setup screen You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the <network ( )> tab. 2. Click <QoS>. 3. Enter an IP address to which you will apply QoS.

  • Page 89: Event Setup

    • Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is <admin4321>. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
  • Page 90 setup screen - Port : The default port of the FTP server is 21; however, you can use a different port number according to the FTP server settings. - Passive mode : Select <on> if you need to connect in passive mode due to the firewall or the FTP server settings.
  • Page 91 to make recording on the SD memory 1. Check the <total size> and the <free size>. 2. If the SD memory has a sufficient free space, set <record> to <on>. Otherwise, check the stored data and if you find them not important, then click <format>...
  • Page 92 setup screen alarm input 1 ~ 4 You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the <event ( )> tab. 2. Click <alarm input>. 3. Specify an input device. • Type - Normal Open : It is normally open, but if it is closed, an alarm will be triggered.
  • Page 93 va / mD This can be set to generate an event signal when a motion or intelligent video analysis event is detected. 1. From the Setup menu, select the <event ( )> tab. 2. Click <va / mD>. DIS cannot be used if VA/MD is used. ` to use motion detection (mD) 1.
  • Page 94 setup screen ` to use intelligent video analysis (va) 1. Select an Intelligent Video Analysis mode. 2. Set <iv analysis function> to <enable>. 3. Select a type. • Line/Area : This detects the change as an object passes across the line or zone set up by the user.
  • Page 95 Motion Detection and Intelligent Video Analysis cannot be used simultaneously. Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected. Detected size of an object may have difference with the actual size according to its shape. Up to 16 objects from the top side of the screen can be displayed.
  • Page 96 setup screen ` to set the video analysis rules (va) Line / area • minimum object Size 1. Set <iv analysis function> to <enable>. 2. Set the type to <Line/area>. 3. Set the event rule to <minimum object Size>. 4. Drag and drop to a desired point of the video.
  • Page 97 • virtual line based rules 1. Set <iv analysis function> to <enable>. 2. Set the type to <Line/area>. The virtual line based rules can be specified only if the intelligence video analysis type is set to <Line/Area>. 3. Set the event rule to <virtual line based rules>.
  • Page 98 setup screen appearing/Disappearing • minimum object Size 1. Set <iv analysis function> to <enable>. 2. Set the type to <appearing/ Disappearing>. 3. Set the event rule to <minimum object Size>. 4. Drag and drop to a desired point of the video.

  • Page 99: Time Schedule

    • Defined area based rules 1. Set <iv analysis function> to <enable>. 2. Set the type to <appearing/ Disappearing>. 3. Set the event rule to <Defined area based rules>. 4. Drag and drop to a desired point of the video. The selected area by the drag-and-drop method will be set as specified.

  • Page 100: Audio Detection

    setup screen network disconnect This can be set to generate an event signal when the physical network connection is cut off. 1. From the Setup menu, select the <event ( )> tab. 2. Click <network disconnect>. 3. Specify the use of “Network disconnect”.

  • Page 101: Face Detection

    face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the <event ( )> tab. 2. Click <face detection>. 3. Set whether or not to < enable >. 4. Set the sensitivity level. As the sensitivity grows, face detection becomes more close and detailed.

  • Page 102: System Setup

    setup screen 5. Specify the activation time and activation condition. For more information about <Activation time> and <Action>, refer to “Alarm input”. (page 92 ) 6. When done, click [apply ( The default tampering detection function may not work properly in the following cases: Under circumstances of simple background or low illumination and night time may lower the detection sensitivity.

  • Page 103: Date & Time

    Date & time 1. From the Setup menu, select the <System ( )> tab. 2. Click <Date & time>. 3. Specify the time and date that will be applied to the camera. • Current system time : Displays the current time settings of your system. •...
  • Page 104 setup screen user 1. From the Setup menu, select the <System ( )> tab. 2. Click <user>. 3. Provide the necessary user information. • Administrator Password Change : Change the password for the administrator. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
  • Page 105 If you forcibly terminate the upgrade process, upgrade will not be completed properly. During restarting the system, accessing with web viewer will not be made. You can download the latest version from the Samsung web site (www.samsungcctv.com). English _105...
  • Page 106 setup screen to back up the current settings 1. Click [Backup]. The Save As dialog should appear. 2. Specify the backup path with a proper file name, and click [Save]. The backup file will be saved to the specified path in the format of “.bin”. to restore the backup settings 1.
  • Page 107 You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • Syslog : You can check the system logs where any system changes are recorded including the time information.
  • Page 108 appendix Specification Description Items SNP-5300N/P SNP-5300HN/HP Imaging Device 1/4-type Exmor CMOS (SONY IMZ076LQZ-C) Total Pixels 1392(H) x 1076(V) Effective Pixels 1368(H) x 1049(V) Video Scanning System Progressive Scan Color : 0.5Lux(50IRE), 0.2Lux(30IRE)/F1.35, Min. Illumination B/W : 0.03Lux(50IRE), 0.009Lux(30IRE)/F1.35 Focal Length (Zoom Ratio) 3.5 ~ 105mm (30X) Max.
  • Page 109 Backlight Compensation Off / BLC / WDR / HLC Wide Dynamic Range 90dB Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise Reduction SSNRIII (2D+3D Noise Filter) (Off / On) Digital Image Stabilization Off / On Motion Detection...
  • Page 110 appendix Description Items SNP-5300N/P SNP-5300HN/HP y File upload via FTP, E-Mail y Notification via E-Mail, TCP y local storage(SD/SDHC) recording at Network Operational Alarm events disconnected y External output y PTZ preset Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264 (MPEG-4 Part 10/AVC), Motion JPEG SXGA (1280 x 1024), 1280 x 960, HD (16:9, 1280 x 720p), Resolution 1024 x 768, SVGA (800 x 600), VGA (640 x 480), QVGA...
  • Page 111 Description Items SNP-5300N/P SNP-5300HN/HP HTTPS(SSL) Login Authentication Digest Login Authentication Security IP Address Filtering User access Log 802.1x Authentication Streaming Method Unicast / Multicast Max. User Access 10 users at Unicast Mode Memory Slot SD/SDHC Memory Slot ONVIF Conformance Network English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Webpage Language...
  • Page 112 appendix Description Items SNP-5300N/P SNP-5300HN/HP Input Voltage / Current 24V AC, PoE+(IEEE802.3at) 15W (AC24/PoE+, Heater Off), Electrical Power Consumption 15W (AC24V), 13W (PoE+) 53W (AC24V Heater On), 25W (PoE+ Heater On) Ivory / Aluminum Color / Material Ivory / Plastic Plastic Sun-Shield Mechanical Dimension (Ø...

  • Page 113: Product Overview

    ` Snp-5300 Unit : mm (inch) Ø152(5.98) Ø133.2(5.24) English _113...
  • Page 114 appendix ` Snp-5300H Unit : mm (inch) 1-1/2 inch PF TAP [Diameter (max) = 47.803mm, Pitch=2.3091mm] Ø220(8.66) 114_ appendix...

  • Page 115: Troubleshooting

    trouBLeSHootinG PROBLEM SOLUTION y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. I can’t access the camera from a y If connected using DHCP, verify that the camera is able to acquire web browser.
  • Page 116 appendix PROBLEM SOLUTION No file is transferred via e-mail y Verify the settings in the following sequence: on occurrence of intelligent video A. Check <Data & Time> settings. analysis event of camera even B. The <IV analysis function> should be set to <Enable>. when the <IV analysis function>...

  • Page 117: Gnu General Public License

    Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 118 You may charge a fee for the physical act of transferring a Subsection b above.) The source code for a work means copy, and you may at your option offer warranty protection in the preferred form of the work for making modifications exchange for a fee.
  • Page 119 enD of termS anD conDitionS application of that system ; it is up to the author/donor to decide if he or she is willing to distribute software through How to apply these terms to your new programs any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is If you develop a new program, and you want it to be of believed to be a consequence of the rest of this License.
  • Page 120 preamble “Licensees” and “recipients” may be individuals or organizations. The GNU General Public License is a free, copyleft license To “modify” a work means to copy from or adapt all or part for software and other kinds of works. The licenses for of the work in a fashion requiring copyright permission, most software and other practical works are designed to other than the making of an exact copy.
  • Page 121 2. Basic permissions. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the All rights granted under this License are granted for the term Program has interactive interfaces that do not display of copyright on the Program, and are irrevocable provided Appropriate Legal Notices, your work need not make the stated conditions are met.
  • Page 122 favor of coverage. For a particular product received by c) Prohibiting misrepresentation of the origin of that a particular user, “normally used” refers to a typical or material, or requiring that modified versions of such common use of that class of product, regardless of the material be marked in reasonable ways as different from status of the particular user or of the way in which the the original version;...
  • Page 123 10. automatic Licensing of Downstream recipients. covered work and works based on it. A patent license is “discriminatory” if it does not include within the scope of its Each time you convey a covered work, the recipient coverage, prohibits the exercise of, or is conditioned on the automatically receives a license from the original licensors, non-exercise of one or more of the rights that are specifically to run, modify and propagate that work, subject to this...

  • Page 124: End Of Terms And Conditions

    15. Disclaimer of warranty. you can change the software and use pieces of it in new free programs; and that you are informed that you can do THERE IS NO WARRANTY FOR THE PROGRAM, TO THE these things. EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT To protect your rights, we need to make restrictions that HOLDERS AND/OR OTHER PARTIES PROVIDE THE...
  • Page 125 Although the Lesser General Public License is Less protective the facility is invoked, then you must make a good of the users’ freedom, it does ensure that the user of a faith effort to ensure that, in the event an application program that is linked with the Library has the freedom and does not supply such function or table, the facility still the wherewithal to run that program using a modified version...
  • Page 126 Library (because it contains portions of the Library), rather e) Verify that the user has already received a copy of than a “work that uses the library”. The executable is these materials or that you have already sent this user a therefore covered by this License.
  • Page 127 If any portion of this section is held invalid or unenforceable DAMAGES, INCLUDING ANY GENERAL, SPECIAL, under any particular circumstance, the balance of the section INCIDENTAL OR CONSEQUENTIAL DAMAGES is intended to apply, and the section as a whole is intended ARISING OUT OF THE USE OR INABILITY TO USE THE to apply in other circumstances.
  • Page 128 Computer Science Department at University College - Redistributions in binary form must reproduce the above London copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials 4. Neither the name of the University nor of the Department provided with the distribution.

  • Page 129: Openssl License

    and/or sell copies of the Software, and to permit persons from this software without prior written permission. to whom the Software is furnished to do so, subject to the For written permission, please contact openssl-core@ following conditions: openssl.org. 5. Products derived from this software may not be called THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, “OpenSSL”...
  • Page 130 THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ‘‘AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF...
  • Page 131 pHp License The PHP License, version 3.01 Copyright (c) 1999 - 2012 The PHP Group. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 132 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 134 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

This manual is also suitable for:

Snp-5300h

Table of Contents