System Setup; Product Information - Samsung SNP-5300 User Manual

setup screen
5. Specify the activation time and activation condition.
For more information about <Activation time> and <Action>, refer to "Alarm input". (page 92 )
`
6. When done, click [apply (
The default tampering detection function may not work properly in the following cases:
`
J
-
Under circumstances of simple background or low illumination and night time may lower the
detection sensitivity.
-
A severe shaking of the camera or a drastic change to the illumination can be considered a
tampering by mistake.
-
Detection of the tampering may take some time (maximum 5 seconds) right after the
tampering was made.
-
Once a tampering is detected, the camera will resume a normal operating after a certain
stability time (approx. 5 seconds) during which no detection will be performed.

SyStem Setup

product information

1. From the Setup menu, select the
<System (
2. Click <product information>.
3. Check the camera information, or
provide details according to your
network environment.
• Model : Model name of the product.
• Serial number : Product serial
number.
• Device name : Provide a device name that will be displayed on the Live screen.
• Location : Specify the location where the camera is installed.
• Description : Provide detailed
information about the camera location.
• Memo : Provide an explanation about the camera for better understanding.
• Language : Select a preferred language for the Web Viewer OSD.
The default language is set to <English>.
`
M
4. When done, click [apply (
102_ setup screen
)].
)> tab.
)].