Manual Network Setup - Samsung SND-5011 Quick Manual

manual netWork setup

Run <Ip Installer_v2.XX.exe> to display the camera search list.
At the initial startup, both [auto set] and [manual set] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
`
M
support this function.
a Select a camera in the search list.
b Click [manual set].
The Manual Setting dialog appears.
c In the <address> pane, provide the
necessary information.
d In the <port> pane, provide necessary
information.
• HTTP Port : Used to access the
camera using the Internet browser,
defaulted to 80. Use the spin button
to change the HTTP Port value.
• VNP Port : Used to control the video
signal transfer, defaulted to 4520.
e Enter the password.
The default password is "4321".
The default password can be exposed to a hacking thread so it is recommended to change the
`
J
password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be
responsible for the user.
f Click [ok].
Manual network setup will be completed.
4_ English
a
c
e
f
b
d