, experience a world of convenience connected anytime, anywhere. Preface Thanks for purchasing of 10X PTZ Network Camera SNP-1000. This is a user instruction manual for a 10X PTZ Network Camera SNP-1000 that employs Samsung Techwin’s WINNER Ⅲ DSP system with superior low light capability.
3.2. Installation ...............22 3.2.1. Preparation for Cable ..........22 3.2.2. Cable Connection........... 23 3.2.3. Installation of SNP-1000......... 25 3.2.4. Installing the SNP-1000 on a Ceiling ...... 26 3.2.5. Installing the SNP-1000 Wall Mount ....... 28 3.2.6. Installing the Dome Housing (STH-1000PI).... 30...
Page 6
10X PTZ Network Camera SNP-1000 3.3. Network configuration and connection method ..31 3.3.1. Configuration/connection using Web page ..... 31 Ch4. How to Use Web Viewer..........36 4.1. How to Use Web Viewer..........37 4.1.1. Login ..............37 4.1.2. Web Viewer screen ..........38 4.2.
Page 8
10X PTZ Network Camera SNP-1000 5.5.6. PTZ Position ............89 5.5.7. Language ............... 89 5.6. Initialization Setting ..........90 5.7. Status...............91 Ch6. Troubleshooting ............92 Appendix A. DDNS Usage.............96 Specifications ...............104 Dimension ..............107 If you refer to the enclosed Quick guide and the...
Note to User Note to User This machine’s electromagnetic waves have been registered as suitable for business purposes; the retailer and consumer should be aware of this registration. If in the case of wrongful purchases, please exchange the product for a home use product. Correct Disposal of This Product (Waste Electrical &...
Page 10
10X PTZ Network Camera SNP-1000 Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.
Product Warranty and Limitations Product Warranty and Limitations The manufacturers of this product do not take any responsibility for this product; therefore, the manufacturer does not authorize the third-party, but allows that retailer is responsible. The product warranty does not extend to cover accidents, negligence, abuse, or wrongful use for the whole or any part of the product.
10X PTZ Network Camera SNP-1000 Warning Symbols Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Danger : Misuse or wrongful operation of the product may result in death, injury or bring about other fatal results.
Page 13
Danger There is risk of shock or fire; be sure to avoid setup in places with high humidity. To prevent shocks, please connect the ground wire. Do not install the camera on a surface that can not support it. Unless the surface is suitable, it could cause falling or other hazards.
10X PTZ Network Camera SNP-1000 Random replacement of built-in battery by other types of batteries may cause explosion. The battery shall be replaced by the same battery. The used batteries shall be disposed carefully because they can cause environment pollutions.
Page 15
Caution Do not install under unstable lighting conditions. Severe lighting changes or flickering may hinder normal camera operation. Do not drop the camera or subject it to physical shock. May cause a product malfunction. Never keep the camera face to strong light directly. May damage the CCD.
1.1. 10X PTZ Network Camera SNP-1000 Introduction 1.1. 10X PTZ Network Camera SNP-1000 Introduction The SNP-1000 is a high-tech network camera that uses MPEG-4 codec technology to allow high compression rates and clear picture quality by allowing for high frame rates to be transmitted through the network.
Page 18
10X PTZ Network Camera SNP-1000 • Auto Swing Pan or Tilt is operated in sequence between 2designated positions. • Group Search Maximum 128 Preset positions are toured in order. • Tour Search Maximum 6 Group Search functions are toured in order.
1.2. Features 128 Preset Position A maximum of 128 Preset positions can be set up. This function enables users to set up the monitoring place any time. Digital Flip When you want to monitor the moving object below the camera, you can execute the Digital Flip. The moving object can be monitored without screen reverse.
2.1. Body 2.1. Body 2.2. Rear panel ① Power Connector ② Audio Input Connector ③ Audio Output Connector ④ Alarm Input/Output Connector ⑤ Network Connector...
3.1. Components and Accessories 3.1. Components and Accessories Accessories Products Sold Separately The following products are provided separately. Accessory Housing - Wall Type Mount : STB-280PW - Wall Type Mount : STB-230PW - Dome Housing : STH-1000PI See pages 25 for product images. Note...
10X PTZ Network Camera SNP-1000 3.2. Installation 3.2.1. Preparation for Cable To install and use the SNP-1000, the following cables should be used. Power Adapter Cable The cable connected to the power input terminal of SNP-1000 is shown below with a rated voltage of DC 12V 4A.
3.2. Installation Lan Network Cable The cable connected to the network device of SNP-1000 for Network communication is shown below. Video cable and LAN network cable are not provided in this product’s package. Note BNC connection terminal can optionally be used to connect when the Analog output is necessary.
Page 28
10X PTZ Network Camera SNP-1000 3. For the network connection of the SNP-1000, connect the LAN Cable as the figure below shows. 4. Then, connect the Power Adapter Cable. Use a driver (-) to screw one part of the Power Adapter consisting of two lines to the Power Input Terminal of the camera holder.
3.2. Installation 3.2.3. Installation of SNP-1000 Precautions for Installation Check that the installation location can safely bear four times the weight of the camera and its installation fittings. When fixing the ceiling installation bracket, use the supplied installation template and fixing screws.
10X PTZ Network Camera SNP-1000 3.2.4. Installing the SNP-1000 on a Ceiling 1. Prepare the accessories in the camera box (power adapter, installation template, audio extension cable, 1 loose-proof screw, 3 installation bracket fixing screws, 2 installation brackets, installation cover, installation CD) and a tool for making a hole in the ceiling.
Page 31
3.2. Installation the template so that the front of the template is in line with the camera direction. Caution: Since there is a danger of the product falling during installation, take care not to allow anyone to stand below the installation area. 3.
10X PTZ Network Camera SNP-1000 3.2.5. Installing the SNP-1000 Wall Mount 1. Prepare the accessories in the camera box (power adapter, audio extension cable, 2 installation brackets, 1 loose-proof screw, installation CD, installation cover) and the wall mount(STB- 280PW or STB-230PW) and 3 installation bracket fixing screws in the mount packaging box.
Page 33
3.2. Installation the template so that the front of the template is in line with the camera direction. Caution: Since there is a danger of the product falling during installation, take care not to allow anyone to stand below the installation area. 3.
To install the Dome Housing (STH-1000PI), fix it instead of installing the cover in the last step “3.2.4. Installing the SNP-1000 on a Ceiling” on page 26 and “3.2.5. Installing the SNP-1000 Wall Mount” on page 28. When the Dome Housing is...
3.3. Network configuration and connection method 3.3. Network configuration and connection method 3.3.1. Configuration/connection using Web page Use when there is one 10X PTZ Network Camera SNP-1000 to be installed. 1. Please connect user’s PC to 10X PTZ Network Camera SNP- 1000 using cross cable.
Page 36
10X PTZ Network Camera SNP-1000 3. After pressing internet protocol (TCP/IP) properties, press the ‘advanced’ button to go into advanced configurations. 4. The IP address of IP setting tap can be added as "192.168.1.XXX" "XXX" is an IP address voluntarily set by a customer.
Page 37
3.3. Network configuration and connection method Default value is ID : admin, PW : 11111111 Note 7. Please configure according to the network environment where 10X PTZ Network Camera SNP-1000 will be installed and push <Save> button to save the configuration.
10X PTZ Network Camera SNP-1000 ① LAN / xDSL/ DHCP Configuration Item Description When network product is connected to normal LAN Use local LAN or when connected to static IP, the network data to be allotted to the IP is configured.
Page 39
3.3. Network configuration and connection method Use DDNS changes its IP address every time the user attempts to connect to the ISP and when the product is connected to a cable modem or xDSL Note modem. In this case, the user cannot know the changed IP address.
4.1. How to Use Web Viewer 4.1. How to Use Web Viewer 4.1.1. Login To connect to the login page, click the ‘move to Webpage’ button on Network Manager or enter network camera IP address on the internet web browser and press the enter key. Enter user ID and password and push <Login>...
10X PTZ Network Camera SNP-1000 4.1.2. Web Viewer screen Web Viewer screen is composed of menu area for camera/video configuration and screen area for displaying input video from camera. Controls Flip Image Vertical reversal of channel screen...
Page 43
4.1. How to Use Web Viewer Stretch Image When selecting resolution with Half D1 and CIF, stretches channel screen to resolution D1 size. Save Image Saves channel screen to ‘JPEG file’. Quad Converts to 4 split screens (applied only to 4 channel server). Compression Video compression mode (the mode of compressing video)
Page 44
10X PTZ Network Camera SNP-1000 Pause Stops video for a while. Displays related information. Displays the title Removes the title...
Page 45
4.1. How to Use Web Viewer Deinterlace On/off function of Deinterlace. Screen where Deinterlace is not applied Screen where Deinterlace is not applied Deinterlace is a function to adjust the video quality Note softly by eliminating the border line which was made by an interlace function.
Page 46
10X PTZ Network Camera SNP-1000 Camera Setup Displays OSD control button of camera. Camera OSD control button is displayed Camera OSD is displayed Day&Night configuration function Day&Night (Color, B/W configuration) PTZ Control PTZ control function Screen where camera PTZ control window is...
Page 47
<Set> button Displays camera OSD or moves to upper/lower menu of selected field. <Exit> button Terminates camera OSD. ※ For configuring the function and detail operating method of 10X PTZ Network Camera SNP-1000, refer ‘Ch5. How to Operate Camera’.
10X PTZ Network Camera SNP-1000 4.2. Using Administration page 4.2.1. Initialization Screen after Connecting When connection is successful, the below screen will be displayed.
10X PTZ Network Camera SNP-1000 4.2.3. Basic Configures basic information for camera. Video/Audio Setup Item Description Video compression mode Compression (Compression mode of video in the camera) If the type of installed camera (NTSC/PAL) is Video Size selected, then the size of screen on the camera becomes selectable.
4.2. Using Administration page Item Description Selects the video channel to be used in the Video Channel camera. Selects whether to use the audio input Audio-In Channel channel in the camera or not. Selects whether to use the audio output in the Audio-Out Channel camera or not.
10X PTZ Network Camera SNP-1000 4.2.4. Network Configures network information of the camera. Network Configuration According to the user’s network environment, it is classified into LAN, xDSL, DHCP. Item Description In case the camera is connected to the local network or xDSL with a static IP address, configure network information to be assigned to the camera.
4.2. Using Administration page Port/DDNS Configuration Item Description This controls communication with camera. Connection Port (Default : 4000) HTTP Port/ This helps to connect to web page or FTP server. FTP Port (Default : http=80, ftp=21) Select if use of SWR function is available. The way Use SWR of connection which used ID does not support.
Page 54
10X PTZ Network Camera SNP-1000 Item Description Administrator Change password of administrator Password Change User clicks ‘Guest’ button to decide whether Guest Setup allowing guest to connect Main Viewer. You can register new user or delete, and set up Current User user’s authority.
Page 55
4.2. Using Administration page Example 1) In case control function is limited (Do not check Controls box) ※ Pan, tilt, zoom, audio output, alarm output function icon is inactivated Example 2) In case video function is limited (Do not check Video) ※...
10X PTZ Network Camera SNP-1000 4.2.6. Pan/Tilt/Zoom Configures PTZ Swing and Preset of the camera.
Page 57
4.2. Using Administration page Item Description Channel Select the channel of camera. PTZ Display Display PTZ menu. OSD Display Display OSD. Set or delete(delete, delete all) the Camera Preset Preset. Screen move the position of Configura Preset. tion Surveille Pan/Tilt Swing at the position Swing of preset, set up the swing menu.
10X PTZ Network Camera SNP-1000 4.2.7. Motion Detection This sets up motion detection function of camera. Item Description Basic grid, used to choose area on the screen, is Grid Display displayed or hidden. When selecting motion detection area, click <Select Select Area All>...
4.2. Using Administration page 4.2.8. Alarm/Sensor This sets up necessary information when using alarm function by attaching sensor to camera.
Page 60
10X PTZ Network Camera SNP-1000 Alarm/Sensor Setup ◊ Digital In Setup Item Description Types of sensors are ‘Normal open’ and ‘Normal Sensor Type close.’ This selects up type of connected sensor. ◊ Digital Out Setup Item Description Set up Alarm Out responding when event is...
Page 61
4.2. Using Administration page Item Description Recipient E-mail You can designate up to two e-mail Address 1 address receiving data when alarm Recipient E-mail occurs. Address 2 In case you use outside e-mail server, Server Name enter the name of the outside e-mail server.
10X PTZ Network Camera SNP-1000 4.2.9. Time Current Time Item Description Date Current setup date displayed Time Current setup time displayed Time Setup Item Description Set Manually Adjust time manually. Time Server Set up address of time server for Server 1 - 5.
4.2. Using Administration page 4.2.10. LOG Recent activities made for camera are displayed as log. Item Description Lines Set up number of lines of the list. Log is viewed with number of lines you set up most View recently. Clear Delete logs.
10X PTZ Network Camera SNP-1000 4.2.11. Upgrade Upgrade program of 10X PTZ Network Camera SNP-1000. System Upgrade Configuration. Item Description Upgrade firmware and Web-page of 10X PTZ Firmware/Web Network Camera SNP-1000. Factory Mode Setup If you click <Reset> button, server is returned to initial value when shipped from the factory after confirmation procedure by administrator.
4.2. Using Administration page 4.2.12. System Reboot System is rebooted after confirmation procedure of administrator. Click <OK> button to reboot System.
5.1. OSD Menu Organization 5.1. OSD Menu Organization PTZ camera can be set up on the OSD (On Screen Display) menu displayed on the video monitor. ① Camera Setting Defaults Auto/Manual/ OneShot ①Focus Mode One Shot AF Mode: On/Off ①Focus ②Zoom Tracking Speed: Slow/Fast Fast...
5.1. OSD Menu Organization ④ OSD Setting Defaults ➊ ①Camera Name Position ①ON/OFF ②Edit ➋ ➋ ON/OFF Preset Number ON/OFF ③Preset Name ①ON/OFF ②Edit ➍ Sequence Status ON/OFF ➎ Area Name ON/OFF ➏ PTZ Position ON/OFF English, 中文, English ➐ Language Francais, Deutsch, Espanol, Italiano...
10X PTZ Network Camera SNP-1000 5.2. PTZ Camera User Menu Settings Execution of OSD Menu : After checking if the camera is in manual operation mode, press the OSD Menu key. The following commands are displayed on the monitor screen.
5.2. PTZ Camera User Menu Settings ➊ Focus Mode Auto : The camera adjusts the focus automatically while monitoring the screen continuously in the auto mode. In the auto focusing mode, zoom key operation is not recognized as the input of the focus key. Manual : In the manual mode, users can adjust the camera focus manually.
10X PTZ Network Camera SNP-1000 - When the objects in the long and short distance are under the same surveillance area - When there is no contrast (white and black) in the object (e.g. sky or wall) - When the thin horizontal line is captured 5.2.3.
Page 73
5.2. PTZ Camera User Menu Settings AWC: Set up the lighting to the objects and corrects the right colour temperature to that of a white object. Camera works under the setup conditions. For the most appropriate condition under the current illumination, capture the white paper and then change the mode into AWC.
10X PTZ Network Camera SNP-1000 5.2.4. Exposure Camera exposure can be controlled. ➊ Brightness The brightness of the screen can be adjusted. ➋ Iris Auto mode or manual mode can be selected. Auto: The brightness of the image signal can be adjusted automatically depending on the amount of light.
Auto Focus function may not work. 5.2.5. Back Light Unlike other cameras, Samsung Techwin’s unique W-III DSP chip gives you a clear image of the subject even with bright backlight. HIGH : Gain increased from 6dB up to 34dB.
10X PTZ Network Camera SNP-1000 5.2.6. AGC When the brightness of the image taken under dark light is under a certain level, the AGC (Automatic Gain Control) functions to define whether to control the Gain automatically or not. HIGH : Gain increased from 6dB up to 34dB.
5.2. PTZ Camera User Menu Settings HIGH : Noise reduction effect is excellent but afterimage is also strong. When you select the AGC mode as “OFF”, you Note cannot use the SSNR function. 5.2.8. Day & Night The darkness level is detected automatically under low light conditions such as at night or under dark light to keep the screen bright and clear.
10X PTZ Network Camera SNP-1000 AUTO : Under day condition, the mode is automatically changed into the COLOR mode to keep an optimum colour. At night, the mode is automatically changed into the B/W mode to distinguish dark images clearly.
5.3. Sequence Setting 5.3. Sequence Setting Sequence Setting Menu 5.3.1 Preset 12 items such as Pan/Tilt location, Zoom and Focus are selected among camera functions and they can be called for monitoring. Total 128 points can be preset. Setting : Select the Preset number for setup. Adjust Pan/Tilt/Zoom and press the Enter key to save the setting.
Page 80
10X PTZ Network Camera SNP-1000 Preset Menu Setting 1. Select the Preset item on the Sequence Setting Menu 2. Select the Setting item. 3. Select the Preset number. 4. Set up the Zoom and Focus. 5. To change the camera settings, select Edit from the upper menu first.
5.3. Sequence Setting In the White Balance setting of the individual Preset Note Scene Adj., the AWC selection is not available. 5.3.2. Swing SEQ Swing surveillance can be executed and set up and the data can be deleted. Pan Swing : Swing surveillance for the Pan direction is executed and set up.
10X PTZ Network Camera SNP-1000 is the moving speed (01-64step). DWL is the stop time (00- 120sec). Press the Execution key in the location with selection mark to finish the setting process. - Execute : Swing surveillance is executed. Stop key designates this function.
5.3. Sequence Setting Setting : The registered Group Sequence is selected by clicking the mouse and confirmed with the Execution key. If the selected number is not registered, it cannot be input. Press the Execution key in the location with selection mark to finish the setting process.
10X PTZ Network Camera SNP-1000 Memorize: Manual operations for minimum 120 seconds after executing this function are memorized into the internal memory. Nevertheless, the memorizing time becomes different depending on the PTZ operation. OVER mark will finish this function. If the operation range is limited using ①Pan Limit and ②Tilt Limit, only the operations within the limited...
5.3. Sequence Setting Time : Auto Run operation is executed after a certain time designated by the user.(Time can be set up by the unit of 5, 10, 20, 30 sec and 1~5 min.) 5.3.7. Power On Resume When the power supply for the camera is stopped for some reason, such as electricity failure, and resumed, the Sequence Settings before the power off are restored.
10X PTZ Network Camera SNP-1000 5.4. P/T Setting 5.4.1. Pan Limit The moving range in the Pan direction can be limited. Position : Moving range can be set up. Set the position from the left using the Execution key. The stop position may change due to the initialization by such operation as power resumption depending on position setting.
5.4. P/T Setting resumption depending on position setting. This does not mean it is out of order. On/Off : The application of limitation will be determined. Default setting is Off. 5.4.3. Area Setting Areas can be indicated. Areas can be designated up to 4. Area Name : Area name can be set up.
10X PTZ Network Camera SNP-1000 5.4.4. Area Masking If you want to exclude some areas for surveillance, they can be turned into black. You can mask 4 parts of one screen. Position : Use the Execution key to determine the position for screen operation from the left.
5.4. P/T Setting 5.4.6. Digital Flip When you operate the Tilt up to 100° limit and keep it for a certain time, the image gets reversed automatically and the opposite Tilt area is seen. When you want to monitor the moving object under the camera, execute the Digital Flip function.
10X PTZ Network Camera SNP-1000 5.5. OSD Setting 5.5.1. Camera Name Camera name is set up. If you want to edit the item, move the cursor. Then Note select the character. Edit : A maximum of 12 characters consisting of English (or Chinese, Japanese), numbers and special characters can be input for Camera Name.
5.5. OSD Setting 5.5.2. Preset Number Preset numbering is set up. (Default setting is ON.) 5.5.3. Preset Name Edit : A maximum of 12 characters consisting of English (or Chinese), numbers and special characters can be input for Preset Name.
10X PTZ Network Camera SNP-1000 On/Off : The operation of this function is predetermined. Default setting is On. 5.5.4. Sequence Status Display of the Sequence Group is set up. (Default setting is ON.) 5.5.5. Area Name Display of Area Name is set up.
5.5. OSD Setting 5.5.6. PTZ Position Pan and Tilt position and Zoom magnification are displayed. PTZ positions are not displayed in the OFF mode. (Only manual operation can display them.) 5.5.7. Language The OSD can be displayed either in English (default setting) , Chinese, French, German, Italy and Spanish.
10X PTZ Network Camera SNP-1000 5.6. Initialization Setting Initialization Menu ①Power On Reset Camera is initialized into the original status of power input. ➋ Initial Position If you want to set the default direction of the camera so that the camera faces that direction when the power is turned on, you can set up the desired Pan and Tilt for the camera.
The status of PTZ camera setting is displayed. CAM MODEL= 10NC Camera Model CAM VERSION= 4.6 Camera S/W Version DOME VERSION= 1.00 Control Board S/W Version CON PROTOCOL=SAMSUNG TW Protocol Setup DOME ID= 001 Dome Camera ID CONTROLLER= Duplex-19200 Communication Mode Setup...
Page 97
Open MS-DOS window to check whether 10X PTZ Network Camera SNP-1000 is connected to network. ※ In case of ping 192.168.1.100, replace it with IP address set up. Please check if the lens is clean.
Page 98
10X PTZ Network Camera SNP-1000 Problem Solution Please check if 'MOTION The MOTION DETECTION function is DETECTION' mode is turned on. not working. Please check if the MD LEVEL is too low. Please check the setting of the MD AREA.
Page 99
Open MS-DOS window and check whether 10X PTZ Network Camera SNP-1000 is connected to network. Click ‘refresh (shortcut; F5) ’ button at No image from web browser to recall the page viewer Check whether power of camera and network cable is properly connected.
DDNS Usage Registration process of DDNS is as following: Step1) Complete the registration form in iPOLiS website. The website is ‘www.samsungipolis.com’. Figure A-1. Website of iPOLiS...
Page 102
10X PTZ Network Camera SNP-1000 Figure A-2. Membership Registration: SIGNUP Figure A-3. Membership Registration: Input your information.
Page 103
DDNS Usage Step2) Register the equipment after login. Figure A-4. Login Figure A-5. The list of registered equipment.
Page 104
10X PTZ Network Camera SNP-1000 Figure A-6. The list of registered equipment. Figure A-7. Product Registration. (Confirm repetition certainly at domain registration.)
Page 105
Click “USE DDNS” in order to do “Enable” and input the address of DDNS Server. (Default: www.samsungipolis.com ) Enter the ID and Password that is written when register product is in iPOLiS website. The Configuration of DDNS in SNP-1000 is Completed.
Page 106
10X PTZ Network Camera SNP-1000 Step4) Confirm the connection status of relevant product in product list of iPOLiS website. Figure A-8. The List of Product. Be able to confirm the information of connected equipment if click <check> button of ‘Product information’.
Page 107
DDNS Usage Figure A-9. Product information Move to Login website of relevant product if click <view> button of ‘ view’. The buttons which are <Edit> and <Delete> of ‘product management’ move to relevant page through input password to item that fertilize or erase information of registered equipment in List of product.
10X PTZ Network Camera SNP-1000 Specifications Camera Part Items SNP-1000N SNP-1000P 1/4” Color Vertical Double Density Interline CCD. Imaging device 410,000pixel NTSC Total Number of Pixels 811(H) X 508(V) 795(H) X 596(V) Valid Pixel 768(H) X 494(V) 752(H) X 582(V) Horizontal Scan 15.734kHz...
Page 109
- Dome Housing : STH-1000PI ※ The product design and dimensions may change without previous notice for improvement of performance. The copyright of this manual belongs to Samsung Techwin Co. Ltd. Note Parts or the whole of this manual cannot be...
Page 110
10X PTZ Network Camera SNP-1000 Network Part Items SNP-1000N SNP-1000P NTSC : 704 x 480(D1), 704 x 240(Half D1), 352 x 240(CIF) Output Resolution PAL : 704 x 576(D1), 704 x 288(Half D1), 352 x 288(CIF) Output Video Format MPEG4 / MJPEG Selectable...
Need help?
Do you have a question about the SNP-1000 and is the answer not in the manual?
Questions and answers