Table of Contents
Advertisement
802.1x
When connecting network, you can choose whether using 802.1x protocol, and then install
the certification.
1. From the Setup menu, select the
<network (
)> tab.
2. Click <802.1x>.
3. Set the <ieee 802.1x Setting(eapoL
using eap-tLS)>.
• Enable IEEE 802.1x : Specify the use
of the 802.1x protocol.
• EAPOL Version : Select version 1 or 2.
• ID : Enter the client certificate ID.
• Password : Enter the client private key password. If the key file used is not
encrypted, you don't need to enter it.
If the connected network device does not support the 802.1x protocol, the protocol will not
J
`
operate properly even if you set it.
4. Install/remove the certificate.
• CA certificates : Select a public certificate that contains the public key.
• Client certificate : Select a public certificate that contains the client certificate key.
• Client private key : Select a public certificate that contains the client private key.
5. When done, click [apply (
to install/remove 802.1x related certificates
1. Press the [Browse (
2. If no certificate is installed, you will see "Not Available" appearing next to the selected
item.
3. Press the [install (
next to the item.
4. Press the [Delete (
)].
)] button for each item and select a certificate to install.
)] button to start installation with a message of "Installed"
)] button to remove the certificate.
English _87
Hide quick links:
Advertisement
Table of Contents
