Connecting The Camera Directly To A Dhcp - Samsung SNP-5300 User Manual

connectinG tHe camera DirectLy to a DHcp

BaSeD DSL/caBLe moDem
Camera
1. Use the cross LAN cable to connect the network cable directly to your PC.
2. Run the IP Installer and change the IP address of the camera so that you can use
the web browser on your desktop to connect to the Internet.
3. Use the Internet browser to connect to the web viewer.
4. Move to [Setup] page.
5. Move to [network] – [DDnS] and configure the DDNS settings.
6. Move to [network] – [interface], and set the network type to [DHcp].
7. Connect the camera, which was removed from your PC, directly to the modem.
8. Restart the camera.
For registering the DDNS settings, refer to "Registering with DDNS". (page 83)
`
M
For configuring the DDNS settings, refer to "DDNS". (page 82)
`
For setting the network type, refer to "Interface". (page 80)
`
INTERNET
DSL/Cable
Modem
DDNS Server
(Data Center, KOREA)
External Remote PC
English _35