Setup Screen; Web Viewer-Network Setup - Samsung SNP-6321H Network Setup Manual

setup screen

WEB VIEWER-NETWORK SETUP

Interface
1. From the Setup menu, select the <Network (
2. Click <Interface>.
3. Set the <Interface> and <IPv6 setup> as necessary.
• IP type : Select an IP connection type.
- Manual : Specify the IP address, Subnet mask,
Gateway, DNS1, and DNS2.
- DHCP : Specify the DNS1 and DNS2.
- PPPoE : Specify the DNS1, DNS2, ID and Password.

If you set it to <Manual>, you should specify the IP, Subnet
mask, Gateway, DNS 1 & 2 manually.
• MAC address : Shows the MAC address.
• IP address : Displays the current IP address.
• Subnet mask : Displays the <Subnet mask> for the set IP.
• Gateway : Displays the <Gateway> for the set IP.
• DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
4. Set the <IPv6 setup>.

Set to <Use> to use IPv6 address.
• Default : Use the default IPv6 address.
• DHCP : Display and use the IPv6 address obtained from the DHCP server.
• Manual : Enter IP address and gateway manually and use it.
5. When done, click [Apply (

J
The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous settings will be restored
automatically.

Once completed with editing, click [Apply (
again with the changed IP.
38_ setup screen
)> tab.
)].
)] to apply changes and the browser exits. After a while, connect