Table of Contents
Advertisement
• Sens-up limit : Set the work condition to Auto mode in a low contrast scene.
• Iris : You can set the camera iris to Auto or Manual to your preference.
- Auto : Automatically sets the iris adaptively to the ambient lighting and shutter
speed.
- Manual : Iris F-No is set manually.
• Iris F-No : If the iris mode is set to Manual, specify the F number of the iris.
As F-No increases, the iris decreases, so the screen is darkened, and as F-No decreases, the
`
screen is brightened.
• AGC mode : Select AGC Control mode.
Adjust the gain value of the video (that, in particular, was recorded at a low
contrast scene and had a lower brightness level than normal) to control the video
brightness.
SSNR, Sens-up and <Auto> mode in daytime/nighttime mode setting cannot be used if the AGC
`
mode is set to <Off>.
Sens-up and <Auto> mode in daytime/nighttime mode setting cannot be used if the AGC mode is
`
set to <Manual>.
• AGC Val : If the AGC mode is set to Manual, specify one between 0dB and 42dB.
Special Setup
1. Select <Special>.
2. Select each item and set it properly.
• DIS : Automatically compensates for
the flicker on the screen.
DIS cannot be used if VA/MD and
`
tempering detection are used.
Digital zoom cannot be used if DIS is used.
`
• Day & night : You can switch the mode to adjust the black and white level as well
as the colors.
- Color : Always displays the video in colors.
- B/W : Always displays the video in black and white.
- Auto : Displays in color mode during normal daytime and switches to black and
white mode in a low contrast scene at night.
Auto daytime/nighttime mode setting cannot be selected if the AGC mode in the <Exposure>
`
menu is set to <Off> or <Manual>.
English _77
Hide quick links:
Advertisement
Table of Contents
