Connect The Cat5 Cable; The Remote Unit; Connect The Remote Devices; Figure 4- Connect Stereo Speakers To Xtendex Local Unit With Audio Support - Network Technologies ST-C5USBV-300M Installation And Operation Manual

ST-C5USBVA-300 (Local Unit)
3.5mm Stereo
Audio Jack

Figure 4- Connect stereo speakers to XTENDEX Local Unit with audio support

Connect the CAT5 Cable

Connect the CAT5 cable to the "CAT5" port on the rear of the
Local Unit (see Fig. 5). (If an RJ45 wall outlet is being used,
connect the other end of the extension cable to it.) When
properly inserted the cable end should snap into place.

The Remote Unit

Connect the Remote Devices

Position the Remote Unit such that the CAT5 cable, the monitor cable, the keyboard and mouse, and the AC adapter
power connector can each reach the Remote Unit comfortably.
1. Connect the monitor cable to the 15HD female VIDEO port on the back of the Remote Unit. (See Fig. 6)
2. Connect the devices to the Remote Unit.
a. Connect the USB keyboard cable (or wireless adapter) to one of the USB Type A female ports labeled "USB
DEVICES" on the back of the Remote Unit. (Either one will work.)
b. Connect the USB mouse cable (or wireless adapter) to the remaining USB Type A female port on the back of
the Remote Unit.
-
+
NTI
R
Network Technologies Inc
XTENDEX
USB
(Front View)
CAT5 Cable to
Remote

Figure 5- Connect the CAT5 cable to the Local Unit

7
Self-Powered
Stereo Speakers
ST-C5USBV-300 (Local Unit)
(Front View)
-
+
NTI
R
Network Technologies Inc
XTENDEX
USB