Operating Systems Supported; Limitations; Materials - Network Technologies ST-C5USBV-300M Installation And Operation Manual

Operating Systems Supported

• Windows 98SE • Linux 7.1 2.2 Kernel or greater
• Windows 2000 • Sun-Solaris 8 or greater
• Windows ME • MAC OS 9.1 or greater
• Window XP • HP UNIX J5000
• Window Vista • Free BSD

Limitations

The XTENDEX will only work with USB keyboards and mice, other USB devices are not supported.
•
PS/2 devices can be connected to the XTENDEX through an NTI USB-PS/2 adapter, however the translation keys described
•
on page 15 will not function in this application.
The XTENDEX can be used between two cascaded NTI switches, but the master switch in the configuration will not be able
•
to list the CPUs connected to the extended slave. The OSD menu in the extended slave would have to be used to monitor
CPUs connected to it. (This can be done by configuring command mode for the slave switch with an Alternate OSD
Command Sequence).

MATERIALS

Materials supplied with this kit:
NTI ST-C5USBV-300 USB Extender Local Unit
NTI ST-C5USBV-300 USB Extender Remote Unit
2-120VAC or 240VAC 50 or 60Hz-9VDC/1A AC Adapters
CD with a pdf file of this owner's manual
Power supply mounting bracket (ST-C5USBV-300M or ST-C5USBVA-300M only)
Additional materials may need to be ordered, depending upon the configuration :
Video adapter for connection between the Local and a non-VGA SUN CPU (13W3M-15HDF)
USBVEXT-3, 6, 10 (15HD Male-to-Female and USB Type A Male-to-Female Extension cable) if the Local Unit will be located
further than 15" from the CPU or KVM switch
CAT5/5e shielded/unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc.
(see pg. 14 for proper EIA/TIA 568B wiring method)
-OR-
CAT6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1,
etc. (see pg. 14 for proper EIA/TIA 568B wiring method)
For Rackmount Modules (ST-C5USBV-300M or ST-C5USBVA-300M) the following materials are required- not supplied :
UMTINT-xx-MM - male 26-PIN SCSI II to male 15-pin HD, male USB Type A- for connecting the Local Unit to a CPU-
available in 3, 6 and 10 foot lengths.
UMTINT-xx-male 26-PIN SCSI II to female 15-pin HD, female USB Type A (x2)- for connecting the Local or Remote Unit to a
monitor, keyboard, and mouse- available in 3, 6, 10 and 15 foot lengths.
UMATINT-xx-MM-male 26-PIN SCSI II to male 15-pin HD, male USB Type A, and 3.5mm stereo plug- for connecting the
Local Unit with audio support to a CPU- available in 3, 6 and 10 foot lengths.
UMATINT-xx-male 26-PIN SCSI II to female 15-pin HD, female USB Type A (x2), and 3.5mm stereo jack- for connecting the
Local or Remote Unit with audio support to a monitor, keyboard, mouse, and stereo speakers- available in 3, 6, 10 and 15
foot lengths.
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-742-8324 (800-RGB-TECH) in US & Canada
or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com
2
and we will be happy to be of assistance.