Cn50 Imager Reading Distances - Intermec CN50 User Manual

Appendix A — Specifications and Default Settings

CN50 Imager Reading Distances

104
Pin
Number Signal Name
2 OTG_ID
3 OTG_VBUS
4 OTG_USB_D-
5 OTG_USB_D+
6 GND
Typical reading distances are done in an office environment using
office lights (4 lux). Minimum distances are measured in the dark (0
lux). Both reading distances are provided in respective scan engine
integration guides. Contact your local Intermec representative for
more information.
Below are the typical and minimum standard reading distances for the
CN50 built with an EA21 or EA11 imager when correctly mounted. An
exit window reduces reading distances by about 4% for all scan engines.
Note: Minimum distances depend on the length of the bar code.
CN50 Mobile Computer User's Manual for Windows Embedded Handheld 6.5
Description
Identification pin
VBUS (5 V @ 100 mA max)
USB data signal
USB data signal
Ground (power return)