Changing The Battery - Intermec CN50 User Manual

Changing the Battery

CN50 Mobile Computer User's Manual for Windows Embedded Handheld 6.5
CN50 Charging Accessory
AC21 quad battery charger
AD23 charge-only multidock
AD24 Ethernet multidock
AE36 vehicle power adapter
AE37 AC adapter
The battery is fully charged when the battery status LED shows a
steady green. For information on these accessories, see
Accessories" on page
To charge the battery:
• Insert the battery into a quad battery charger, a single dock, or a
multidock, or attach external power to the CN50 with the battery
installed.
The CN50 resets when you remove the battery.
To change the battery:
1 Save your files and close any open applications.
2 Shut down the CN50 by going to Start > Shut Down. For more
information, see
3 If necessary, disconnect the handstrap from the top of the CN50.
AB25 Charging Time
6 hours
6 hours
6 hours
6 hours
6 hours
5.
"Warm Booting the Computer" on page
Chapter 1 — Using the Computer
"CN50
97.
7