Finding Your Configuration Number; Finding Your Software And Firmware Version Numbers; Resetting The Computer; Warm Booting The Computer - Intermec CN50 User Manual

Finding Your Configuration Number

Finding Your Software and Firmware Version Numbers

Resetting the Computer

Warm Booting the Computer

CN50 Mobile Computer User's Manual for Windows Embedded Handheld 6.5
Chapter 9 — Troubleshooting and Maintaining the Computer
You can find most of the information listed above in Intermec
Settings. Consult your application developer for information on your
custom application.
To find the configuration number of your computer:
• Look at the CN (configuration number) and SN (serial number)
fields on the label inside the battery compartment.
To find your mobile computer's software and firmware version
number:
1 Tap Start > Settings > System > About.
2 Tap Packages to find software version numbers.
3 Tap Build to find the firmware version.
You rarely need to reset the computer. If the computer does not
resume after pressing the Power button, or if the computer or an
application locks up, you may need to reset the computer. The
computer uses the configuration currently saved in flash memory
during the boot process. There are three ways to reset the computer:
• Warm booting the computer
• Cold booting the computer
• Clean booting the computer
You may need to perform a warm boot to correct conditions where an
application stops responding to the system.
97