Charging The Battery; Changing The Battery - Intermec CN4 User Manual

Chapter 1 — Using the CN4

Charging the Battery

Changing the Battery

4
If you fail to replace the low battery immediately, you may lose
important data or applications.
If the CN4 is not on external power and you remove the battery
pack, you need to install a charged battery within 5 minutes, or
the CN4 resets and you could lose data.
Dispose of used batteries promptly. Keep away from children. Contact
your Intermec representative for replacement batteries.
The battery pack should be fully charged before you use the CN4 for
the first time. If battery temperatures are within the battery charging
range of 0° to 40°C (32° to 104°F), the standard battery pack takes
up to four hours to charge. The extended battery pack takes up to five
hours.
The battery is fully charged when the battery status LED shows a
steady green.
To charge the battery
• Insert the battery into a quad battery charger, a single dock, or a
multidock, or attach external power to the CN4 with the battery
installed. For information on these accessories, see
on page 104.
For all charging methods, it takes 5 hours or less to fully charge
the CN4 batteries.
When you remove the battery from the CN4, an internal super
capacitor maintains your status, memory, and real-time clock for up
to 5 minutes. To maximize this time, suspend the CN4 before
changing the battery.
"Accessories"
CN4 Mobile Computer User's Manual