Buffalo TeraStation III TS-IXL User Manual page 54

Alert Sound Alert Sound
Settings Settings
Click "Modify
Settings"
to change
settings.
Display
Flip Display Items
LCD brightness
Front Panel
Settings
LED brightness
Click "Modify
LED
Settings"
Synchronization
to change
LED brightness
settings.
(Sleep)
Begin Sleep
Wakeup
Power Management
Synchronize
with UPS
UPS
Connection
Type
TeraStation
UPS Settings
behavior
When Power
Click "Modify
failure
Settings"
to change
UPS Behavior
settings.
After
TeraStation
has shut down
UPS Recovery
function
Restart Restart
TeraStation
Shutdown Shutdown
TeraStation
TeraStation IS Setup Guide
Beep alerts can be triggered by the following conditions : "Overheating", "Disk
Error", "FanError", and "UPS Power Error".
Select items to display on LCD display at the front of the TeraStation from "Host IP",
"Disk Mode", and "Time".
Set if automatically switching the item to display on the LCD or not.
Adjust backlight brightness of the LCD display in 5 levels.
Adjust the brightness at the front of the TeraStation in 5 levels.
Select whether using the feature to change the LED brightness synchronized with
time. For example, you can change the brightness on day time and night time.
Adjust the brightness of LED in 4 levels while in dark.
Set the time (0 to 23 o'clock) to darken LED brightness. This can be set in every 00
minute at 1 hour interval.
Set the time (0 to 23 o'clock) to change LED brightness back to the normal setting.
This can be set in every 00 minute at 1 hour interval.
"Enable" to sync the TeraStation with a UPS. "USB Port/APC Style (or OMRON Style)" can
only be set if your are using a USB type UPS manufactured by APC.
Select a connection method for the UPS. "USB Port/APC Style (or OMRON Style)" can be
set only when you are using USB type UPS manufactured by APC.
You may set how long the Terastation runs after a power failure before it shuts down. Or,
you can set it to shut down when the UPS signals "Battery Low". Shutting down when
the battery is low is only available when the UPS is connected with a USB cable. You can
also set the TeraStation to shut down when the number of iSCSI connections becomes 0
(zero).
You may also elect to have the UPS shut down after the TeraStation shuts down.
Enable to have the TeraStation reboot automatically when normal AC power is restored.
Click "Restart" to reboot the TeraStation.
Click "Shutdown" to turn off the TeraStation. To turn it back on, press the power button
on the front of the unit.
53