Mail.notification - Buffalo TeraStation III TS-IXL User Manual

Mail Notification
You can choose to send status report emails from the TeraStation to a specified email address. Emails are normally
send when TeraStation settings are changed or an error occurs.
Status emails contain the following:
・hard drive status
• RAID configuration changes
• RAID errors
• Fan errors
• Drive read errors
• Drive replacement alerts
1
2
6 To use a secure connection, select SSL/TLS.
7 Enter the subject line for notification Emails.
Note: Use single-byte alphanumeric characters only. Hantsu, kanji, and other double-byte characters
should not be used. .
8 Enter an email address. Up to 5 email addresses may be entered.
TeraStation IS Setup Guide
1 To configure status email reports, navigate to "Maintenance" -
"Maintenance" in the configuration utility.
2 Under Mail Notification, click "Modify Settings".
1 Enable Mail Notification.
2 Enter the SMTP server address and SMTP port number.
Note: If using pop before smtp, enter the POP3 server address and POP3
port number.
3 Select the authentication type from Disabled/POP before SMTP/
LOGIN (SMTP-AUTH)/CRAM-MD5(SMTP-AUTH/CRAM-MD5)).
4 Enter a username.
5 Enter a password.
Note: You cannot use ' (a single quote mark) for a password.
31