Buffalo TeraStation III TS-IXL User Manual page 45

Configuring port trunking on the TeraStation:
1
Connect TeraStation's LAN port 1 to a LAN port on your switch. If you've configured a port on the switch for
port trunking, use that one. Do not connect the TeraStation's LAN port 2 yet.
2
3
Click "Modif y Settings".
4
5
Connect TeraStation's LAN port 2 to a second LAN port on your switch. If you've configured another port on
the switch for port trunking, use that one.
6
Press and hold the power button on the TeraStation for 3 seconds to turn it off. Press the power button
again to power up the TeraStation.
Port trunking is now configured.
TeraStation IS Setup Guide
Navigate to "Basic" - "Network" - "Port Trunking" in the configuration
utility.
1 Select the items to configure for port trunking.
2 Click "Save".
44