Configuring.normal.mode - Buffalo TeraStation III TS-IXL User Manual

Configuring Normal mode
1
2
3
Click "Delete RAID Array". This will take several seconds, and the front panel display will show
ARRAY x Creating".
4
When "Are you sure you want to change the RAID mode?" is displayed, click "Apply".
5
The Confirm Operation screen will appear. Type in the confirmation number and click "Apply" within 60
seconds.
6
Follow the instructions displayed on the screen.
You have configured Normal mode. Refer to page 15 to create volumes on the four drives. Use Windows Disk
Management to format the volumes on the drives, then connect to the formatted volumes with the iSCSI hard
disk connection tool and use them as local drives on your computer.
TeraStation IS Setup Guide
In the configuration utility, click "Basic" - "Storage" - "RAID Array".
Choose the array to change.
"RAID
19