Initialization from the Configuration Utility
You can also initialize the TeraStation from the configuration utility.
The following settings are reset to their factory defaults:
TeraStation Name, Description, NTP setting, RAID maintenance, setting of the Initialization switch of the main
unit, Mail notification setting, UPS synchronization setting, Administrator password, network settings (IP
address, subnet mask, etc.), alert beep, display panel, language setting, system log
1
2
The Confirm Operation screen will appear. Type in the confirmation number and click "Apply" within 60
seconds.
3
Follow the instructions displayed on the screen.
TeraStation IS Setup Guide
1 N avigate to "Maintenance" - "Restore/Format".
2 Click "Restore TeraStation".
Note: To keep the current admin username and password, navigate
to "Maintenance" - "Restore/Format", select "Change Settings",
"Keep current admin password", then "Save".
40