Changing.the.ip.address.of.the.terastation - Buffalo TeraStation III TS-IXL User Manual

Changing the IP address
If desired, you may manually set the TeraStation's IP address. Use the iSCSI hard drive connection tool (included on
your CD) to manually set the TeraStation's IP address.
Note: You can only change the TeraStation's IP address settings from a computer that is connected to the same
subnet as the TeraStation.
1
Click "Start" - "All Programs" - "BUFFALO" - "iSCSI HDD Connection Tool" - "iSCSI HDD Connection Tool".
The iSCSI HDD Connection Tool will launch.
2
Select your TeraStation from the "Target" dropdown menu, then click "Setup", then "Change IP Address".
3
You have changed your TeraStation's IP Address settings.
TeraStation IS Setup Guide
If you have a DHCP server on your network, check this box to have
your IP address set automatically.
You may enter an IP address, subnet mask, and default gateway here.
Enter the admin password. The admin password is required to
change IP address settings.
Click "OK".
41