Specifications And Requirements; Specifications - Yamaha F200 Owner's Manual

EMU40500

Specifications

TIP:
"(SUS)" indicates that the specification is for
the outboard motor when it is equipped with a
stainless steel propeller.
EMU2821R
Dimension and weight:
Overall length:
920 mm (36.2 in)
Overall width:
548 mm (21.6 in)
Overall height L:
F200B 1742 mm (68.6 in)
F200FET1 1742 mm (68.6 in)
Overall height X:
1869 mm (73.6 in)
Motor transom height L:
F200B 516 mm (20.3 in)
F200FET1 516 mm (20.3 in)
Motor transom height X:
643 mm (25.3 in)
Dry weight (SUS) L:
F200B 226 kg (498 lb)
F200FET1 226 kg (498 lb)
Dry weight (SUS) X:
227 kg (500 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Rated power:
147.1 kW (200 HP)
Idle speed (in neutral):
650-750 r/min
Power unit:
Type:
4-stroke DOHC L4 16valves
Total displacement:
2785 cm³ (169.9 c.i.)
Bore × stroke:
96.0 × 96.2 mm (3.78 × 3.79 in)

Specifications and requirements

Lower unit:
Fuel and oil:
Ignition system:
TCI
Spark plug (NGK):
LFR6A-11
Spark plug gap:
1.0–1.1 mm (0.039–0.043 in)
Steering system:
Remote steering
Starting system:
Electric starter
Starting carburetion system:
Fuel injection
Valve clearance IN (cold engine):
0.17–0.24 mm (0.0067–0.0094 in)
Valve clearance EX (cold engine):
0.31–0.38 mm (0.0122–0.0150 in)
Min. cold cranking amps (CCA/SAE):
680 A
Min. marine cranking amps (MCA/ABYC):
770 A
Min. reserve capacity (RC/SAE):
160 minutes
Maximum generator output:
50 A
Gear shift positions:
Forward-neutral-reverse
Gear ratio:
1.86(26/14)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F200B M
F200FET1 M
FL200FET1 ML
LF200B ML
Recommended fuel:
Premium unleaded gasoline
Min. pump octane number (PON):
89
14