Specifications And Requirements; Specifications - Yamaha LF200 Owner's Manual

EMU34521

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
EMU2821P
Dimension:
Overall length:
868 mm (34.2 in)
Overall width:
634 mm (25.0 in)
Overall height X:
1829 mm (72.0 in)
Overall height U:
F250A 1956 mm (77.0 in)
LF250A 1956 mm (77.0 in)
Motor transom height X:
643 mm (25.3 in)
Motor transom height U:
F250A 770 mm (30.3 in)
LF250A 770 mm (30.3 in)
Dry weight (SUS) X:
F200A 284 kg (625 lb)
F225A 284 kg (625 lb)
F250A 284 kg (626 lb)
LF200A 284 kg (625 lb)
LF225A 284 kg (625 lb)
LF250A 284 kg (625 lb)
Dry weight (SUS) U:
F250A 290 kg (639 lb)
LF250A 290 kg (639 lb)
Performance:
Full throttle operating range:
5000–6000 r/min

Specifications and requirements

Rated power:
Idle speed (in neutral):
Engine:
Type:
Displacement:
Bore × stroke:
Ignition system:
Spark plug (NGK):
Spark plug gap:
Control system:
Starting system:
Starting carburetion system:
Valve clearance IN (cold engine):
Valve clearance EX (cold engine):
Min. cold cranking amps (CCA/SAE):
Min. marine cranking amps (MCA/ABYC):
Min. reserve capacity (RC/SAE):
Maximum generator output:
F200A 147.1 kW (200 HP)
F225A 165.5 kW (225 HP)
F250A 183.9 kW (250 HP)
LF200A 147.1 kW (200 HP)
LF225A 165.5 kW (225 HP)
LF250A 183.9 kW (250 HP)
600-700 r/min
4-stroke DOHC V6 24valves
3352 cm³ (113.3 US oz, 118.2 Imp.oz)
94.0 × 80.5 mm (3.70 × 3.17 in)
TCI
LFR6A-11
1.0–1.1 mm (0.039–0.043 in)
Remote control
Electric starter
Electronic fuel injection
0.17–0.24 mm (0.0067–0.0094 in)
0.31–0.38 mm (0.0122–0.0150 in)
512 A
675 A
182 minutes
44 A
13